2021+ F-150 FORScan List / Database / Spreadsheet

[SilverPigeon]

...1.) I want to change the blinkers from 3 to 5, can someone tell me the "hex" entry for this...

No need; this one works in "easy mode" - go to SCCM module configuration and look for "Lane change cancel blink number". Edit the box from 3 to 5.

If you really want to do it in asbuilt configuration though, you would change:

724-01-01

xxxx

0Cxx

--

To:

724-01-01

xxxx

14xx

--

because C hex = 12 decimal is 3 blinks. The note says to add 4 to increase the blinks by 1, so C+4=10 (12+4=16 in decimal) gives 4 blinks and 5 blinks is C+8=14 (12+8=20 in decimal).

Sponsored

 

[digitaltrucker]

No need; this one works in "easy mode" - go to SCCM module configuration and look for "Lane change cancel blink number". Edit the box from 3 to 5.

If you really want to do it in asbuilt configuration though, you would change:

724-01-01

xxxx

0Cxx

--

To:

724-01-01

xxxx

14xx

--

because C hex = 12 decimal is 3 blinks. The note says to add 4 to increase the blinks by 1, so C+4=10 (12+4=16 in decimal) gives 4 blinks and 5 blinks is C+8=14 (12+8=20 in decimal).

Thank you! I knew about the easy mode, but was/am concerned about what all/it changes. Not fearful of doing the asbuilt, since I did my old 13.

 

[digitaltrucker]

If you install the bigger optional battery in a 21, are there changes to make via Forscan?

 

[M.R.F.O.R.D.]

If you install the bigger optional battery in a 21, are there changes to make via Forscan?

No change needed

Just reset BMS

 

[SilverPigeon]

Thank you! I knew about the easy mode, but was/am concerned about what all/it changes. Not fearful of doing the asbuilt, since I did my old 13.

Not sure if this eases your concern, but it's good to know this post I made regarding advanced FORScan configuration: https://www.f150gen14.com/forum/threads/a-primer-for-advanced-forscan-editing.27460/

 

[digitaltrucker]

No change needed

Just reset BMS

Thanks

 

[BlackMamba]

Is there a way we can program for this hand option to always be on? I like that when activated and going in reverse and then going to Park then the E Brake engages. If always on I assume that even if not going in reverse and I park the vehicle, that the e-brake will engage.

 

[digitaltrucker]

Weird situation, after doing the "easy method" to increase the number of blinks for lane change, I cam out this morning and my apple car play no longer worked. Had to delete every thing (paired connection between truck and phone) and re-establish.

 

[HammaMan]

Weird situation, after doing the "easy method" to increase the number of blinks for lane change, I cam out this morning and my apple car play no longer worked. Had to delete every thing (paired connection between truck and phone) and re-establish.

Should be wholly unrelated unless you were playing with the APIM. I've never had to reassociate a phone in all of the stuff I've tried, ever and I've played with a lot of stuff.

 

[digitaltrucker]

Should be wholly unrelated unless you were playing with the APIM. I've never had to reassociate a phone in all of the stuff I've tried, ever and I've played with a lot of stuff.

Yep most likely coincidental, all I did was the easy mode for the change. Anyway all is good now!

 

[BlackMamba]

Is there a way we can program for this hand option to always be on? I like that when activated and going in reverse and then going to Park then the E Brake engages. If always on I assume that even if not going in reverse and I park the vehicle, that the e-brake will engage.

Any thoughts ?

 

[SilverPigeon]

You can try:

7D0-01-02	x*xx	xxxx	xx--	Driver Restriction Images (DRI) • Park Hold (PH) • Type of RVC Camera (TRVCC)
2 =	DRI Allowed • PH Enabled (Hitch Improvement Feature) • TRVCC Analog		A =	DRI Restricted • PH Enabled (Hitch Improvement Feature) • TRVCC Analog
3 =	DRI Allowed • PH Enabled (Hitch Improvement Feature) • TRVCC Digital		B =	DRI Restricted • PH Enabled (Hitch Improvement Feature) • TRVCC Digital

But it should already be one of these above. It is reset on each key cycle so I don't think it's possible. There are 2 ways to enable it, the hand and the + (zoom), and that's all I guess.

 

[jfalat]

Finally got to test it, and it's no go on my '23. As the FORScan sheet covers more vehicles than f-150s, it's probably not an implemented part of IPC software/firmware/hardware.

Wonder what would happen if you put in a pressure transducer FROM A 5.2 RAPTOR..I pulled schematics on it and it looks like VREF EOP and SIGRTN are all the same pins as 3.5.. signal back is pin 29 on PCM.. THE IPC inputs for the gauge look the same...

 

[owensri2]

Replaced my ACM and APIM (To add Nav and HD Radio/Sirius XM and now the volume pop up that usually shows your volume level always say "Minimum" and the speed compensation volume will not let you enable it. I'm sure this is related. Any idea how to make it display the volume level again? The volume does change sound wise, just not visibly.

 

[SilverPigeon]

Replaced my ACM and APIM (To add Nav and HD Radio/Sirius XM and now the volume pop up that usually shows your volume level always say "Minimum" and the speed compensation volume will not let you enable it. I'm sure this is related. Any idea how to make it display the volume level again? The volume does change sound wise, just not visibly.

What do you have for:
APIM:

7D0-01-02

xxxx

xx*x

xx--

HW SWC (HWSWC) • Number of Bladders (NB)

?

Sponsored