2021+ F-150 FORScan List / Database / Spreadsheet

[Livnitup]

The following is confirmed working on 2021-23 & 2024 (thanks @antho)

AutoRelock - if you hit the unlock button on the fob and do not open a door within the timer it will lock the truck
BCM 726-20-01 0101 0101 01--
BCM 726-27-01 xxxx xxxx x1--
2021-23 BCM 726-58-02 xxx* xxxx xx-- 1=30 seconds, 2=45 secs
2024 BCM 726-58-02 x*xx xxxx xx-- 1=30 seconds, 2=45 secs
APIM 7D0-09-01 xx3x xxxx xx-- (optional) adds Autorelock to settings, vehicle, locks

Sponsored

 

[ChilledRims]

I'm new to FORScan but checked it out with my '24 yesterday and enabled a few things. A question about the "Easy" method of making changes.

Any downsides to it? If I enable something that doesn't exist/doesn't work on my MY, will it error or write a potentially problematic change - or succeed and just not change anything?

I also saw that the walk away locking was in the easy section, too - is that for the '24s as noted in an earlier post, or only for the Lightnings?

Thank you all for your hard work on finding these tweaks!

 

[C. Mays]

The following is confirmed working on 2024 F150 by @antho and will be added to the common spreadsheet. This doesn't work on my 2021 but I'll update this if anyone with a 22-23 can confirm working or not.

AutoRelock - if you hit the unlock button on the fob and do not open a door within the timer it will lock the truck
BCM 726-20-01 0101 0101 01--
BCM 726-27-01 xxxx xxxx x1--
BCM 726-58-02 x*xx xxxx xx-- 1=30 seconds, 2=45 secs
APIM 7D0-09-01 xx3x xxxx xx-- (optional) adds Autorelock to settings, vehicle, locks

Confirmed on a 22MY, but 726-58-02 designation is as follows. I haven't tried adding to the APIM.

 

[Livnitup]

Confirmed on a 22MY, but 726-58-02 designation is as follows. I haven't tried adding to the APIM.

Confirmed working? What is your value on 726-58-02? I'm unsure what you're getting at by posting that?

 

[JEB]

Confirmed working? What is your value on 726-58-02? I'm unsure what you're getting at by posting that?

I think @C. Mays was suggesting that the fourth bit of 726-58-02 should be changed and not the second bit.

 

[C. Mays]

Confirmed working? What is your value on 726-58-02? I'm unsure what you're getting at by posting that?

Yes, confirmed working. Sorry for the confusion. I tried to upload a video but says it’s too large. All other changes are the same

 

[C. Mays]

I think @C. Mays was suggesting that the fourth bit of 726-58-02 should be changed and not the second bit.

Exactly. Maybe if a future BCM update is released it may change.

 

[Livnitup]

Thanks @C. Mays! I didn't even realize the 21-23 had the timer in a different location than the 24 and it's working on my 21 so should be fine on 21-23 as well as 2024. I will go back and edit my original post and the common spreadsheet

 

[Kefoster2]

You are breaking the number in half to try to make sense of it. You wouldn’t take 27 and 76 put them together and get 2776, you would have 27+76. Do the conversion to hex, then worry about where they go.
09F2=2546
0A6D=2669
Those may not be your exact circumference, but really close. You can use this simple calculator as well to go from dec to hex or vice-versa.

https://calculator.name/baseconvert/hexadecimal/decimal/0A6D

I went from stock 265/60/18 to 275/65/18 the RPM is 651 and the diameter is 815.34 MM. I know from using WAZE that there is a 3MPH difference but want to correct the computer to read new tires. What should I change?

 

[Zyvin]

I went from stock 265/60/18 to 275/65/18 the RPM is 651 and the diameter is 815.34 MM. I know from using WAZE that there is a 3MPH difference but want to correct the computer to read new tires. What should I change?

That would be a circumference of 2561mm that equals hex 0A01. You can use the “easy” mode in Forscan now to just enter the circumference like in this video.

 

[Kefoster2]

That would be a circumference of 2561mm that equals hex 0A01. You can use the “easy” mode in Forscan now to just enter the circumference like in this video.

Thank you very much

 

[Hyins]

Maybe someone interested ...

DBR_Time_HL_Cfg (DBRTHLC) • Seconds = Hex2Dec(****)
726-78-01 xxxx 1194 xx--
1194=4500 seconds=75 minutes

DBR_LowSoC_HL_Cfg (DBRLSCHLC) • Percent = Hex2Dec(**)
726-78-01 28xx xxxx xx--
28=40%

I don't know what these abbreviations mean
DBR=dual battery relay?
HL=high level?
LL=low level?

 

[Hyins]

Hi @Livnitup could you please help explain these abbreviations in the BCM

DBR
NLI
SCA
IEP
EXEEL
Transit =Ford Transit?

 

[Livnitup]

Hi @Livnitup could you please help explain these abbreviations in the BCM

DBR
NLI
SCA
IEP
EXEEL
Transit =Ford Transit?

DBR - don't know
NLI - Night Lock Indicator -- an LED located in the vehicle interior
SCA - mood lamps
IEP - don't know
EXEEL = Extra EEL but don't know what EEL is
Transit - not sure

 

[Livnitup]

DBR_Time_HL_Cfg
DBR_LowSoC_HL_Cfg (DBRLSCHLC)

I don't know what these abbreviations mean
DBR=dual battery relay?
HL=high level?
LL=low level?

DBR_Time_HL_Cfg = Time - High-Limit - for which relay remains closed at Ign OFF. Selected for batteries tolerant to higher cycling, e.g. AGM type.

DBR_Time_LL_Cfg - Time - Low-Limit - for which relay remains closedat Ign OFF. Selected for normal batteries intolerant to higher cycling.

Sponsored