Quest for BlueCruise 1.4 on 2022 Powerboost

[HammaMan]

Trying to upgrade the IPMA module, but it won’t list the entire block list, tried everything…looking forward to help from the pros. FWIW the APIM was flawless.

Sponsored

 

[TruckFan]

Thanks for the follow-up…just got it back from a test drive and all is working fine. Well, better than fine—-it’s amazing!

 

[Khal]

Thanks for the follow-up…just got it back from a test drive and all is working fine. Well, better than fine—-it’s amazing!

I got back from a 1200 round trip last week - Vegas to San Diego.. Bluecruise drove 99% of the route. Very stable, 0 cut outs. I couldn't be more grateful to have this.

It did superb in stop and go traffic too, I just had to set the speed limit to 15 so it wouldn't chase the car ahead and then brake hard - People can't seem to drive in stop and go lol. They just rush to come to a full stop a few feet ahead.

 

[TruckFan]

That is great to hear. I appreciate your initial post as well as the wealth of information that everyone on this forum shares. It moved me to a place of courage to do the same thing. Thanks to Rugedraw for the specific help.
This is a great forum.

 

[Vater]

Alright guys, after playing around with Foreskin.. I think I got it!! Please let me know if this is what I should see in the cruise control settings to confirm i have 1.4

Thanks again to everyone on here and especially @rugedraw

I'll take her out for a spin tomorrow and grab some videos for you guys.

Question. After FDRS updating your modules, what Forscan changes are needed to actuate the Blue Cruise Lane assist and turn signal lane change features - I have a 21, PB Limited here so I have quite a few modules to update. Regards, James

 

[buuuhler]

Question. After FDRS updating your modules, what Forscan changes are needed to actuate the Blue Cruise Lane assist and turn signal lane change features - I have a 21, PB Limited here so I have quite a few modules to update. Regards, James

Congratulations, you're going to love it. (Except for the predictive speed assist) hard no for me ?

 

[UNCGrad]

Can we get rid of the predictive speed through Forscan? I am not a fan. Thanks!

 

[rugedraw]

Can we get rid of the predictive speed through Forscan? I am not a fan. Thanks!

Yes, you can turn if with the following changes:

706-02-02

xxxx xxxx 00--

 

[UNCGrad]

Yes, you can turn if with the following changes:

706-02-02

xxxx xxxx 00--

Thanks!

 

[Touringsedan]

Good afternoon all,
I have been trying to get my job 1 2021 F140 Platinum upgraded to Blueceuise 1.2 with Fords help since I have not received any OTA since before Dec. 2024. The Dealer updated with the software available through FDRS and then Ford sent what was to update me to BC 1.3 (the available updates for the following modules, ABS, PCM, ACM, and SODCMC – this should allow for BlueCruise 1.3 to take effect.) but that did not work. Then today I get email saying that no 2021 F150 was to be upgraded beyond BC 1.0. I am at a loss now. What next? Looking for anything to fight Ford. Thanks in Advance

 

[rugedraw]

Good afternoon all,
I have been trying to get my job 1 2021 F140 Platinum upgraded to Blueceuise 1.2 with Fords help since I have not received any OTA since before Dec. 2024. The Dealer updated with the software available through FDRS and then Ford sent what was to update me to BC 1.3 (the available updates for the following modules, ABS, PCM, ACM, and SODCMC – this should allow for BlueCruise 1.3 to take effect.) but that did not work. Then today I get email saying that no 2021 F150 was to be upgraded beyond BC 1.0. I am at a loss now. What next? Looking for anything to fight Ford. Thanks in Advance

First of all, the modules you mentioned above have nothing to do with BC 1.4. With that said, your truck has all the necessary software for BC 1.4. I don't know who sent you that email, but that is highly inaccurate information. All you need is FORScan to enable BC 1.4 on your truck.

 

[Gulfstream]

First of all, the modules you mentioned above have nothing to do with BC 1.4. With that said, your truck has all the necessary software for BC 1.4. I don't know who sent you that email, but that is highly inaccurate information. All you need is FORScan to enable BC 1.4 on your truck.

I have 2021 Job1 F150 also. Is possible that I too can enable BC 1.4 with just Forscan?? No FDRS or Mongoose? (I Hope!!) I've PM'd you my VIN. Thank You!!

 

[Touringsedan]

First of all, the modules you mentioned above have nothing to do with BC 1.4. With that said, your truck has all the necessary software for BC 1.4. I don't know who sent you that email, but that is highly inaccurate information. All you need is FORScan to enable BC 1.4 on your truck.

I received all instructions for FORD EAP team. I will look at FORSCAN since I have never used it. My truck is stock as far as any engine mods. All work has been completed at my FORD dealership.
Thanks

 

[Touringsedan]

First of all, the modules you mentioned above have nothing to do with BC 1.4. With that said, your truck has all the necessary software for BC 1.4. I don't know who sent you that email, but that is highly inaccurate information. All you need is FORScan to enable BC 1.4 on your truck.

Which section of the Forscan spreadsheet should I be looking at for the enabling Pieces for BlueCruise? TIA

 

[rugedraw]

Which section of the Forscan spreadsheet should I be looking at for the enabling Pieces for BlueCruise? TIA

It's not posted publicly. Message me when you're ready to do it and I'll walk you through it.

Sponsored