2021+ F-150 FORScan List / Database / Spreadsheet

[farmtruckman]

@farmtruckman what are you APIM values right now? Sounds like the same issue I fought trying to add ACC/IACC way back in the day maybe.

@superfordman Is there any specific value that you need? This was the last screenshot of APIM I have. Thanks for your help.

Sponsored

 

[superfordman]

@superfordman Is there any specific value that you need? This was the last screenshot of APIM I have. Thanks for your help.

Yup, just as I though, you don't have this enabled which hung me up on my 21. Enable it and see what it does then.

				Electric Horizon (EH) • Electric Horizon Type (EHT)
7D0-05-01	xx*x	xxxx	xx--	EH Electronic horizon EH	0 to 8

 

[Waverider]

I can't find it on the "common" tab. Is there a setting to increase the maximum temperature of the heated steering wheel? I did this on my Bronco Badlands and it made a big difference. Also is it correct the global up/down windows only applies to front doors?

 

[NickT_]

I can't find it on the "common" tab. Is there a setting to increase the maximum temperature of the heated steering wheel? I did this on my Bronco Badlands and it made a big difference. Also is it correct the global up/down windows only applies to front doors?

That isn’t on the common tab, maybe someone can help you on that tho.

Global up/down front door only correct.

Edit: SCCM
HSW_Level_3_TempSetPt (HSWLTSP)
724-06-01 *xxx xxxx --

HSW_AutoShutOffTime (HSWASOT)
724-06-01 x*xx xxxx --

Maybe someone can confirm this….

 

[Waverider]

That isn’t on the common tab, maybe someone can help you on that tho.

Global up/down front door only correct.

Thank you. After scouring the entire workbook I think I found it on the SECM • 7C5 tab.

 

[NickT_]

Thank you. After scouring the entire workbook I think I found it on the SECM • 7C5 tab.

I edited my post and I found something on the SCCM.

So not sure which one you would need to change

 

[Nightshade]

I can't find it on the "common" tab. Is there a setting to increase the maximum temperature of the heated steering wheel? I did this on my Bronco Badlands and it made a big difference. Also is it correct the global up/down windows only applies to front doors?

Yes there is, you can change it through the easy way (non asbuilt) SCCM—once loaded, search for heat steering wheel temperature and use the drop down to select the highest temp. Write to truck. You can do the same for timing, mine is set to off/no auto shutoff.

Just did this first thing when I picked my truck up in August lol.

‘24 Lariat.

 

[farmtruckman]

Yup, just as I though, you don't have this enabled which hung me up on my 21. Enable it and see what it does then.

				Electric Horizon (EH) • Electric Horizon Type (EHT)
7D0-05-01	xx*x	xxxx	xx--	EH Electronic horizon EH	0 to 8

@superfordman I will try out these changes in a while. Should I keep ISA disabled? @SilverPigeon in an earlier post suggested to keep it disabled.

@farmtruckman , next change is to leave TSR enabled but disable ISA (which isn't available anyway). If this change makes no difference, leave it in place and we'll try the next one.
edit: helps if I put it in the comment ?

720-03-01

x4xx

xxxx

xx--

The post where ISA was disabled.

 

[farmtruckman]

@superfordman and @SilverPigeon we did it - it is working correctly now. I made the changes to 7D0-05-01 with the ISA disabled and took the truck for a spin. Played with the ACC button a few times and IACC worked every time and adjusted CC accordingly. Thank you both of you.

I saw something odd though. At times, the truck automatically changed speed to 60kmph as if it saw a 60kmph sign, but there was no sign close by. I will take it for another spin later on and try to observe the behaviour.

But thank you again both of you. It is a great feature to have, specially for a long drive.

 

[SilverPigeon]

...I saw something odd though. At times, the truck automatically changed speed to 60kmph as if it saw a 60kmph sign, but there was no sign close by. I will take it for another spin later on and try to observe the behaviour...

That behaviour is the result of the "fusion" setting. It means the ACC will take input both from navigation and the windscreen camera doing speed sign recognition. If you change it to "Camera Only", you may get pre-collision assist not available warnings on the cluster. That was my experience. So I'd leave that alone and you'll get to know the places that it happens and get used to it.

 

[SilverPigeon]

...

				Electric Horizon (EH) • Electric Horizon Type (EHT)
7D0-05-01	xx*x	xxxx	xx--	EH Electronic horizon EH	0 to 8

Thank you Troy, I've now added that to my list as well ??

 

[superfordman]

@superfordman and @SilverPigeon we did it - it is working correctly now.

Great to hear, its nice to have. Ya, newer trucks seem to already have that enabled but 21s didn't for some reason or if they didn't have ACC/IACC. So I had to work through that when I added it to my 21 ways back.

Thank you Troy, I've now added that to my list as well ??

Yup, seems like its only needed for 21's, maybe some 22, but in your case with a 23 it should have already been enabled.

 

[farmtruckman]

That behaviour is the result of the "fusion" setting. It means the ACC will take input both from navigation and the windscreen camera doing speed sign recognition. If you change it to "Camera Only", you may get pre-collision assist not available warnings on the cluster. That was my experience. So I'd leave that alone and you'll get to know the places that it happens and get used to it.

@SilverPigeon Understood. I read up on it and yes it is possibly that. The HERE maps Ford uses are so outdated in UAE but all this serves a good reminder that I still need to pay attention on the road.

 

[farmtruckman]

Great to hear, its nice to have. Ya, newer trucks seem to already have that enabled but 21s didn't for some reason or if they didn't have ACC/IACC. So I had to work through that when I added it to my 21 ways back.

Yup, seems like its only needed for 21's, maybe some 22, but in your case with a 23 it should have already been enabled.

@superfordman @SilverPigeon are there any other features like IACC that I might be missing on? I’d like to turn them on.

 

[SilverPigeon]

... in your case with a 23 it should have already been enabled.

Yes, it was. Like you my list is now for helping people ?

Sponsored