Sponsored

22Platinum

Well-known member
Joined
Feb 9, 2022
Threads
12
Messages
272
Reaction score
240
Location
Virginia
Vehicles
2021 KR 3.5
Occupation
software engineer
Finally bit the bullet and did the Superlift 6" with King suspension from RealTruck. Got it on 4th of July sale for $800 off and free shipping. Also got some 22x10 -25 American Forces wrapped in Nitto Recon Grappler LT325/50/22s, mounted balanced and shipped free. $11,200 to my door. A few thoughts follow.

Superlift: The kit is well engineered with very tight tolerances. This was my first entire kit and I am pleased now that I have an understanding of the end result; I expect the front of the truck is stiffer now. The instructions were hardly adequate: tiny black and white photos; the section about cutting the frame is wrong; no "big picture" description up front. They do not have a website, a phone number or a YouTube presence that I could find, so you are on your own. I am of the opinion that this kit is better designed then the similar BDS kit.

King suspension: I did not know what to expect replacing most of the suspension with "off road" components. My truck is a mall crawler and I was more interested in a soft ride and better handling but no "on road" six inch lift kit and suspension exists that I could find. The truck actually handles better. Bumps are more noticeable, sometimes jarring. The truck is busier down the highway. If you hustle the truck the suspension really comes to life. Overall it is stiffer but it isn't displeasing.

22x10 -25: Required more cutting and trimming than I had hoped. The top corner of the bump hits, the crash bars hit slightly and the fender near the door also needs to be cut.

Recon Grapplers: I went with the LT tire because the speed rating was marginally higher. The noise is noticeable but certainly acceptable. Gas mileage looks like it will be poor.

Vendors: I contacted CustomOffsets, AmericanTrucks and @Realtruck all in an effort to do this build. I guess Amazon has spoiled me; I did not realize it would be such a headache ordering parts and having them shipped. I originally did not intend on the American Forces but apparently chrome wheels from China are impossible to get right now.

CustomOffsets was at least up front about this problem, though I was not pleased with the salesman I encountered.

AmericanTrucks listed the wheel I wanted as in stock, but I had called the wheel manufacturer directly after speaking with CustomOffsets and they told me there aren't any in the country. I called AmericanTrucks to confirm and the salesman there assured me that the wheels were in stock and would be at my door the next week so I placed the order, but I called right back and spoke with someone else who confirmed that they are not in stock so I cancelled. The initial salesman at AmericanTrucks managed to let slip that he was just ordering from RealTruck.

RealTruck was the better of the bunch and did a good job overall. Their website still shows the order as pending fulfillment. They updated the order with two separate "tracking" numbers that 404'd. The wheels were special order and would take 4-6 wheels to make and ship, so when I called back the next day to switch away from the LT tires I thought we had plenty of time. I called day after day and week after week, only to end up in the LT tires. My salesman was certain he had switched the tires but the order never reflected the change. I asked for a supervisor once and they told me the entire order would have to be cancelled in order to switch tires, which I believe is the ultimate truth, so if you order from them know it's a one-and-done deal: you better be happy with what you pulled the trigger on.

Ford F-150 Superlift 6", King Suspension, RealTruck considerations -- installed review & photo photo_2024-07-28_20-13-33
Sponsored

 
Last edited:

Blue22

Well-known member
Joined
Feb 18, 2022
Threads
16
Messages
899
Reaction score
1,089
Location
Southeast, PA
Vehicles
2022 F150 Lariat Sport SuperCrew 5.0L
Good on you for taking the leap and not getting discouraged when you ran into obstacles. No matter what anyone thinks of your truck, one thing is for sure, you've got bigger balls than me. I would LOVE to go big like that but the practical side of my brain always wins out.

It sucks getting older.
 

ChemGuy

Well-known member
First Name
Cole
Joined
Dec 9, 2022
Threads
8
Messages
136
Reaction score
150
Location
Wisconsin
Vehicles
2021 XLT Sport 5.0
Occupation
Chemical Reactor Operator
To me its too much lift for those tiny tires/wheels. Dont like the HUGE gap. Meh.
Tiny tires? 325/50/22 is 35" tall by damn near 13" wide...

The wheels wouldn't be my first choice, but it's not my money or truck.

Looks good @22Platinum
 

Sponsored

Bossharp

Well-known member
First Name
Clinton
Joined
Dec 1, 2023
Threads
28
Messages
581
Reaction score
605
Location
Florida
Vehicles
Honda
Occupation
Retired USN
I would hate to have to hop up and get in one sitting that high just to go to the store.. But I'm 70 now so there's that. Down here in Florida folks will use dozers and other heavy equipment to create a hundred plus acres 'Mud Bog' pits pay big money on mods on nice trucks and just get in to see if they can get stuck..And this is in 100 degree hot summer days. But usually there's very cold beer and other beverages so there is that..
 

UncleFester

Well-known member
Joined
Feb 23, 2024
Threads
1
Messages
185
Reaction score
209
Location
Great Lakes
Vehicles
2023 F150
Tiny tires? 325/50/22 is 35" tall by damn near 13" wide...

The wheels wouldn't be my first choice, but it's not my money or truck.

Looks good @22Platinum
True they are tall/fat but get lost with that lift and the balance is way off for my taste. But as you said his truck, his money, to each their own.
 

TexasTruck

Well-known member
First Name
Scott
Joined
Oct 16, 2022
Threads
44
Messages
904
Reaction score
747
Location
Texas
Vehicles
2022 Ford F-150 STX BAP
Occupation
I fix software bugs!
Looks nice! Looks proportionate to me and no "Cali" look even better! Nice to see polished/chrome wheels again vs painted what ever or black chrome even, but to each he/him/his own as they say today :)

Having lifted several trucks in my day, I wonder what you did, if any, to your drive shafts? Looks like you have a CC short bed like me and have a one piece driveshaft. I imagine the U joint angles are a bit steep now.

In my 2020 Plat SB 6" ICON the only way I got a smooth ride at all speeds is a new dom steel driveshaft with a CV at the transfer case and -1* to -2* (for axle wrap) through the yoke at the pinion.
 
OP
OP
22Platinum

22Platinum

Well-known member
Joined
Feb 9, 2022
Threads
12
Messages
272
Reaction score
240
Location
Virginia
Vehicles
2021 KR 3.5
Occupation
software engineer
Looks proportionate to me and no "Cali" look even better!
What's the Cali look? I'm really happy with how it turned out.. I'm glad I avoided the bigger and wider wheels, and given the slightly aggressive offset there's no way I'd have gotten any more tire on it.
Nice to see polished/chrome wheels again vs painted what ever or black chrome even, but to each he/him/his own as they say today :)
YES I prefer the classic timeless look. I chose this specific wheel because I felt like it resembled the wagon-style wheels Ford's been putting on the King ranch trucks for years now (though not this one.. really disliked that Ford put the XLT wheels on the 702a.)
Having lifted several trucks in my day, I wonder what you did, if any, to your drive shafts?
I didn't do anything, I've seen where the two piece driveshafts need to be shimmed in order to prevent vibration but this doesn't seem to apply to the one piece. I've been up to 80mph so far and it's surprisingly smooth, especially considering the tires alone were 75 lbs a piece. I'll get you a photo of the driveshaft angles shortly.


you've got bigger balls than me. I would LOVE to go big like that but the practical side of my brain always wins out.
It was definitely not a rational decision to make and it probably wasn't worth 5 figures but I've been quite thrilled with it.
 
Last edited:

Sponsored


FORDTEXAS

Well-known member
Joined
Jun 29, 2021
Threads
163
Messages
2,157
Reaction score
1,421
Location
Texas
Vehicles
2022 F150 LARIAT
you would’ve saved a pretty penny with the BDS kit. they come with Fox coilovers too..
 
OP
OP
22Platinum

22Platinum

Well-known member
Joined
Feb 9, 2022
Threads
12
Messages
272
Reaction score
240
Location
Virginia
Vehicles
2021 KR 3.5
Occupation
software engineer
Tiny tires? 325/50/22 is 35" tall by damn near 13" wide...

The wheels wouldn't be my first choice, but it's not my money or truck.

Looks good @22Platinum
Its actually 34.84" x 13.23..

Thanks man I'm pretty stoked. I'm finding it's a head-turner

Ford F-150 Superlift 6", King Suspension, RealTruck considerations -- installed review & photo 1722337043367-y9
 
Last edited:

ChemGuy

Well-known member
First Name
Cole
Joined
Dec 9, 2022
Threads
8
Messages
136
Reaction score
150
Location
Wisconsin
Vehicles
2021 XLT Sport 5.0
Occupation
Chemical Reactor Operator
Ford F-150 Superlift 6", King Suspension, RealTruck considerations -- installed review & photo Screenshot 2024-07-30 072110



I was using this instead of Nitto's website. Close enough lol. Either way, it looks good and IMO the tires don't look "tiny."

That black/grey two-tone is a beautiful combo.
 
OP
OP
22Platinum

22Platinum

Well-known member
Joined
Feb 9, 2022
Threads
12
Messages
272
Reaction score
240
Location
Virginia
Vehicles
2021 KR 3.5
Occupation
software engineer
That black/grey two-tone is a beautiful combo.
ugh that's such a touchy subject lol

Its antimatter blue but this particular truck shows as black 99% of the time
Sponsored

 
 







Top