Show me your leveled trucks!

[SilverSurfer]

22 PB Lariat w/max tow
Ford Performance set at 2.5
SPC forged UCAs
Netted 1.75 inches in the front and the ride is freaking great

Day 1

After

Sponsored

 

[Lricaud81]

2023 XLT 5.0 fx4
2.5” spacer
315/70r18

Which 2.5" spacer did you go with. Anything else uca or shocks.
I have a 23 Screw 5.0 fx4 and I want to get it as level as possible without any rake if possible.

 

[OleMustyBag]

Which 2.5" spacer did you go with. Anything else uca or shocks.
I have a 23 Screw 5.0 fx4 and I want to get it as level as possible without any rake if possible.

I wish I knew I had it done at Allout off road. Just get one that is solid metal. 2.5” and you should be pretty good. Only problem now is when I add weight to the bed or pull a trailer it squats really bad. So I am about to add some helper bags. Also mine is a fx4 too I just peeled the stickers off. Shocks are decent but when they wear out I want to do some fox 2.5” dsc and get rid of the spacer.

 

[Lricaud81]

I wish I knew I had it done at Allout off road. Just get one that is solid metal. 2.5” and you should be pretty good. Only problem now is when I add weight to the bed or pull a trailer it squats really bad. So I am about to add some helper bags. Also mine is a fx4 too I just peeled the stickers off. Shocks are decent but when they wear out I want to do some fox 2.5” dsc and get rid of the spacer.

Yeah i saw yours was 23 xlt fx4 5.0
Only difference mine is xl/stx
Dang I wish they'd told you what they did and used. I see alot of people use the motofab spacer . Don't really hear alot of people saying needing uca or anything. I believe those are like 7-800 by themselves so I'd assume the shop you took yours to you would've realized it being well over 1000 for your level.
I dont really tow. I have a 5x7 small trailer I put my zero turn on but only hauled it twice in the 4 years I've had it. Lol.

 

[OleMustyBag]

Yeah i saw yours was 23 xlt fx4 5.0
Only difference mine is xl/stx
Dang I wish they'd told you what they did and used. I see alot of people use the motofab spacer . Don't really hear alot of people saying needing uca or anything. I believe those are like 7-800 by themselves so I'd assume the shop you took yours to you would've realized it being well over 1000 for your level.
I dont really tow. I have a 5x7 small trailer I put my zero turn on but only hauled it twice in the 4 years I've had it. Lol.

The level kit they charged me $125 so it was something a lot cheaper then those. Stock UCA. The whole thing was around $450 including install and alignment. It rides great! Really smooth.

 

[Lricaud81]

The level kit they charged me $125 so it was something a lot cheaper then those. Stock UCA. The whole thing was around $450 including install and alignment. It rides great! Really smooth.

Ok thats what I was wanting ro hear. Lol. Thats around what I was quoted for a puck level around here too.
I'm excited to get that rake out. I dont have max tow or the scales and all that it's just regular. If yours is that too our trucks are the same except your xlt compared to me stx so I should have same results as you do and I like the way yours looks. It looks very level in the pics you posted.

 

[Beef_Stew]

Motofab 1.5 inch level on stock wheel setup for now. Raised the front Exactly 1.25 inches

 

[OleMustyBag]

Ok thats what I was wanting ro hear. Lol. Thats around what I was quoted for a puck level around here too.
I'm excited to get that rake out. I dont have max tow or the scales and all that it's just regular. If yours is that too our trucks are the same except your xlt compared to me stx so I should have same results as you do and I like the way yours looks. It looks very level in the pics you posted.

I don’t have max tow or scales either. It is very level not sure you would want to go with a taller puck. The back is still .5” taller then front but you really can’t tell without measuring.

 

[Lricaud81]

I don’t have max tow or scales either. It is very level not sure you would want to go with a taller puck. The back is still .5” taller then front but you really can’t tell without measuring.

Yeah I really like the way yours looks. I can live with .5 or so rake but this 3-4 inch is killing me . I haven't measured it but to me its ridiculous

 

[Texcellent]

2023 XLT 5.0 fx4
2.5” spacer
315/70r18

Looks like you are at the one off 99?
Looks great man!

 

[first150]

2022 XLT 5.0
Fox 2.0s
295/70/18

 

[bcb97]

2022 Lariat 3.5eco Max Tow. 285/65/20 Falken Wildpeak AT3w's.

Had a 2.5" leveling kit installed. Thought it almost looked nose high. So then I installed Bilstein 5100's in the rear thinking it would raise the back end slightly. It actually dropped a 0.5" which made it look worse. Finally I installed a 2" block in the rear replacing the oem block. So after all of that, I finally like the stance.

 

[Ford Motor Company]

2022 XLT 5.0
Fox 2.0s
295/70/18

Love the lift! Thanks for sharing!

 

[doolin64]

Rough Country 2in Level
285/75r18 Cooper Discoverer AT3 XLT

Is this the full RC kit that has the rear block as well?

 

[Piarulli]

Is this the full RC kit that has the rear block as well?

This is just the spacer level.

Sponsored