Request VIN Lookup Thread

[Jesse-Infotainment]

Updated a couple weeks ago but wouldn’t hurt to check.

1FTFW1ED9NFB06106

@Jesse-Infotainment: Will not updating my wireless charger block other unrelated updates? I swapped it out for a standard storage bin.

No. You’re fine.

You do need to disable it in the as build though

Sponsored

 

[speedracercjr]

Sorry..I bad

1FTEW1EP9MKD67196

You got a full day of updating for your buddy's truck:

 

[Kanuck]

You got a full day of updating for your buddy's truck:

Thanks... I see that. Being this is only my second time updating. What ones should be done first?

 

[speedracercjr]

Thanks... I see that. Being this is only my second time updating. What ones should be done first?

It doesn't necessarily matter, but once you start the CCM it will chain a whole bunch of them so make sure you're batter tender is setup correctly. Its either the IPC or IPMA that takes a couple of hours by itself, I can't remember which one.

 

[Kanuck]

It doesn't necessarily matter, but once you start the CCM it will chain a whole bunch of them so make sure you're batter tender is setup correctly. Its either the IPC or IPMA that takes a couple of hours by itself, I can't remember which one.

Thanks Cory.... I have the battery tender recommended and the Mongoose.

 

[kb2755]

Same response as above applies to you. You got 3.5.2 a month ago, and nothing in your queue, but you have a 2022. Just be patient and you'll get your updates.

Thank you! Was more or less curious about what, if anything, was in the queue. Dealer allegedly did my trailer brake recall back in April and I didn’t believe they actually did it, since it seemed too early for the availability of the software fix. Seeing others with it listed in the update list, I was curious if it was still sitting there for mine ?

 

[speedracercjr]

Thanks Cory.... I have the battery tender recommended and the Mongoose.

Good luck, your buddy is going to have a new truck after this!

 

[rugedraw]

Thank you! Was more or less curious about what, if anything, was in the queue. Dealer allegedly did my trailer brake recall back in April and I didn’t believe they actually did it, since it seemed too early for the availability of the software fix. Seeing others with it listed in the update list, I was curious if it was still sitting there for mine ?

I can confirm that your dealer did successfully update your TRM in April. I am confident that more updates have been released for it since then. My dealer updated my TRM in September as part of a recall and right after they did it, I got an OTA that superseded the update the dealer had just done with FDRS.

 

[rack04]

A quick look at my VIN would be appreciated. 1FTFW1ED6MFB86236. Wondering if it's time to re-up the FDRS subscription. Thanks in advance.

 

[speedracercjr]

A quick look at my VIN would be appreciated. 1FTFW1ED6MFB86236. Wondering if it's time to re-up the FDRS subscription. Thanks in advance.

That's all you got

 

[speedracercjr]

@Jesse-Infotainment looks like a new CMR update is out, wasn't there yesterday, any idea what it might be?

 

[Jesse-Infotainment]

@Jesse-Infotainment looks like a new CMR update is out, wasn't there yesterday, any idea what it might be?

No.. no idea .. I’ll take a look

 

[Jesse-Infotainment]

@Jesse-Infotainment looks like a new CMR update is out, wasn't there yesterday, any idea what it might be?

Ok yes it is available I don’t know what it does but it shows to be a package. So it may update the CMR, CCM, PSCM and possibly the ipma

 

[Paul Neubauer]

It doesn't necessarily matter, but once you start the CCM it will chain a whole bunch of them so make sure you're batter tender is setup correctly. Its either the IPC or IPMA that takes a couple of hours by itself, I can't remember which one.

I think the IPC was the 6 hour update when it would not work using USB.

Sponsored