2021+ F-150 FORScan List / Database / Spreadsheet

[Livnitup]

I just added a Lightning APIM spreadsheet here that has some updated values: https://bit.ly/3xbvWrR

Sponsored

 

[GDN]

I just added a Lightning APIM spreadsheet here that has some updated values: https://bit.ly/3xbvWrR

Wow - more than 1100 lines additional in the Lightning version. There has to be some fun stuff in there somewhere we can change or turn on !!

Thank you for putting into this what you do. I'm still learning. Trying to understand where all of the data comes from and how to interpret some of it. For now sticking to very well known and documented changes.

 

[Jbcaindo]

So I had global open close before the dealer force updated blue cruise on my early '21.

I went back through ddm, pdm, bcm and APIM and rewrote the values as the spreadsheet indicates and nadda.

It won't even show up in the radio anymore
Anyone else seen these values be useless now?



Update
Oddly enough, after Livinitup said do a reset, I went back out to the truck, it said F150 saved or something, and voila, windows menu added, clicked on, windows now work. How odd.

 

[jcaspar]

Is there a way to enable cameras at speed and front camera for off roading? It seems the values for 706-02-02 conflict.

 

[Livnitup]

Is there a way to enable cameras at speed and front camera for off roading? It seems the values for 706-02-02 conflict.

Use this for 706-02-02 Ixxxx CF03 xx--

 

[YahKnot2022Limited]

I tried doing a search but couldn’t find anything. Is there a way to activate the glare free matrix headlights in my 2022 F-150 Limited? I don’t understand the google docs and where it says you can activate/enable them. And forgive my lack of experience and understanding about this stuff. Thanks!

 

[Snakebitten]

There's a dedicated thread relating to enabling Glare Free headlights.

It's around here somewhere. I'll look for the link.

Edit:

https://www.f150gen14.com/forum/threads/adaptive-head-lights-coming-to-the-us.7004/

 

[YahKnot2022Limited]

There's a dedicated thread relating to enabling Glare Free headlights.

It's around here somewhere. I'll look for the link.

Edit:

https://www.f150gen14.com/forum/threads/adaptive-head-lights-coming-to-the-us.7004/

You are the BEST!! Not sure why I couldn’t find that, but I’ll blame it on my severe inability to know the right key words I guess. Thanks again!!

 

[scuba]

Anybody figure out how to disable the "stow work surface" alarm in the gauge cluster? My bench-seat truck sets the alarm off EVERY time when the center console is folded up into seat-mode. I'm aware I'm in the minority on this one since everyone has the fancy shifter in the middle but it's SUPER annoying.

I didn't see any takers on this. Anyone figure out how to disable? In my front-bench with "interior work surface" Lariat, I'm able to slide the work surface about 90% of the way forward before triggering the warning.

 

[Livnitup]

I didn't see any takers on this. Anyone figure out how to disable? In my front-bench with "interior work surface" Lariat, I'm able to slide the work surface about 90% of the way forward before triggering the warning.

I don't see any asbuilt in IPC/BCM to disable it so you'd probably have to unplug the switch

 

[scuba]

I don't see any asbuilt in IPC/BCM to disable it so you'd probably have to unplug the switch

Good deal. Thanks for checking.

 

[antho]

Good deal. Thanks for checking.

Should be a 2 pin connector. Pin 1 runs to the BCM and pin 2 is ground. Not sure what the switch type is (NO/NC) but if unplugging doesnt work, May have to put pin 1 to ground. (jumper from pin 1 to pin 2)

 

[scuba]

Alright dudes, mission accomplished. Will send pics of my solution. Shocker that my first major contribution to this forum coincides with my first colonoscopy tomorrow. ?

So I went for a physical solution rather than grounding the switch-- based on ease of access and inexperience with electrical.

1. Remove top of work surface. 1a. unclip "Ford" trim piece at rear of work surface to reveal two small torx screws holding a 3in metal strip that keeps the top on the track that the thing slides in.
2. Slide the work surface top off of the front.
3. This reveal the sensor switch on the driver's side. Figure out a way to keep it depressed (depressing indicates the surface is stowed). I used pipe cleaners.

 

[JRev]

Ford Performance splash screen? I’m drawing a blank on this one. I did the Raptor screen thinking it just said Ford Performance but it also says Raptor.

 

[Nightshade]

Ford Performance splash screen? I’m drawing a blank on this one. I did the Raptor screen thinking it just said Ford Performance but it also says Raptor.

Yeah the Ford performance splash screen only remains for the raptors only.

Sponsored