Will level work with CCD and Blue cruise

[NoCo150]

I currently have the 2” ready lift on my 21 powerboost with 34” tires on 20s. I don’t have blue cruise but have Adaptive cruise and lane keep. Adaptive cruise works great, no issues. I don’t like how the lane keep acts though. Seems like it’s searching for the lane lines and will bounce left and right to find the lines then acts fine for a couple miles until it does it again. I just ended up turning it off for now.

I got a letter from Ford to have my software updated for the blue cruise once I did that the lane keeping is really nice now and doesn’t fight you. The BlueCruise is nice but only works on the interstates in my area. The update was free and Ford gives you 2 years of BC free.

Sponsored

 

[wessermgm]

I’ve got an appointment to add Ready Lift 2” level. I am worried about Bluecruise. I wanted to upgrade to 34”s but decided to stick with 33”s so as to not add another inch of height and stress the BC and CCD systems more. The tech I spoke with really feels that wider tires mess with BC more than height. He says that even 285 tires have lost BC, and 295 he’s seen more so. You look at the sensor pattern seems to make some sense as the sensors would likely see the tire and disrupt the system.

 

[Yetman]

Wessermgm — it’s been a few months now and I can tell you that everything works as it should with the level and 34’s. I’ve had zero issues with blue cruise or any other electronic feature

 

[sglide05]

CCD?

 

[Yetman]

Yes. My truck is equipped with CCD

 

[oneinch]

A previous post eluded to maybe having to adjust Blue Cruise after the level lift. Those that have had the level lift done and are not having any Blue Cruise issues after doing so, was any Blue Cruise adjustment required? Or did you just have the truck lifted and Bob's your uncle everything works the same as before?

 

[Yetman]

Left the truck as is. No post adjustment was needed. Everything worked as it should.

 

[sglide05]

What does CCD mean?

 

[NotMyName]

What does CCD mean?

CCD - Continuously Controlled Dampening suspension. It’s an option that also gives you built in weight scales for loads

 

[sglide05]

CCD - Continuously Controlled Dampening suspension. It’s an option that also gives you built in weight scales for loads

Thank you.

 

[PopsActual]

Hey all. New to this forum. I’m taking delivery of my ‘22 Platinum PB next weekend and want to do the Ready Lift level and likely 34” or 35” Nittos (still deciding between Recon and Ridge Grapplers). Where are you all getting the work done for level and tires? I’d prefer to do it at the dealer so they can reset the CCD sensors. Sounds like some dealers won’t do it? I’m in Texas for reference. TIA.

 

[Yetman]

In my case, the dealer wouldn’t do the work as they claimed it would void the warranty and interfere with CCD. I used a shop they recommended, across the street from dealership. As I’ve said, no reset of CCD was needed in my case. EVERYTHING worked as it did before the level and the 34’s. My truck hasn’t been to the dealership and I’ve got 1,000+ miles on this set up.

 

[64Wing]

Used the Ready Lift 2" kit on my Lariat. No trouble with CCD at all, still rides great. However, I am having trouble with the headlights not auto-leveling and my 360 cams, though working, don't seem to show as nice of a stitched 360 view anymore. Couple blurred spots and the top-down view doesn't stitch together to show the lines in a parking spot as a solid line; the line is split and offset from itself.

 

[Yetman]

I haven’t had any issues like you describe. Headlights auto level just fine and zero camera issues. Same 2” ready lift

 

[capiche87]

I have a MY23 with CCD coming. How do you like the ride? Do you think it makes a big difference?

Sponsored