What does this symbol mean

[Nickcdn]

What does this symbol mean? I was towing a trailer but had trailer BLIS set up.

Sponsored

 

[Roscopcoletrain]

Means the blis is not active

 

[Nickcdn]

This is odd if it is, I had set up the trailer BLIS… does anyone else get this symbol while trailering?

Means the blis is not active

 

[RedTXV]

I get it when trailer is connected. System just says “cross traffic alert not available”.

No trailer set up though.

 

[Nickcdn]

I think you nailed it. Cross traffic alert is off… the line across the BLIS symbol..

I get it when trailer is connected. System just says “cross traffic alert not available”.

No trailer set up though.

 

[Roscopcoletrain]

This is odd if it is, I had set up the trailer BLIS… does anyone else get this symbol while trailering?

I've had it on mine. I set up blis as well, however it's always given me a message and that symbol. Never lights up on the mirrors either when towing.

 

[EricR]

I've had it on mine. I set up blis as well, however it's always given me a message and that symbol. Never lights up on the mirrors either when towing.

Odd. When towing the trailer coverage by blis is always active and is a fantastic feature.

Hopefully Ford can get this working for you!

-Eric

 

[Atlee]

This is odd if it is, I had set up the trailer BLIS… does anyone else get this symbol while trailering?

Sometimes. It will be working on the outbound portion of the trip (with the trailer in tow), but will not be working when heading back to the house.

Haven't figured out why, yet.

 

[Yves]

You need to define the trailer and make sure to select it. Mine works fine and yes this is a nice feature.

 

[DT444T]

You have to SELECT the trailer when you plug into it, also.

BLIS doesn't know WHICH trailer it's hooked to. Only that there IS a trailer.

 

[Boone]

As stated above you have to go in and select your saved trailer. Otherwise it deactivates the BLIS. The system selects default when you hook up the trailer and do not quickly acknowledge the trailer selection prompt on the screen. Once you select your save trailer again the BLIS off indicator should go away.

 

[Roscopcoletrain]

I always select my trailer, as its tracking the milage and fuel consumption for it correctly. I'll have to play with it more to see why its not working.

 

[Roscopcoletrain]

So mine seems to reset each time. I select my saved trailer, but I have to put the measurements back in again. After a Shut off, normal driving when I go back in, I have to set the length and width all over

 

[TRACKTOY]

hi
question ? how i select a new trailer in the system the procedure ? with the pro trailer assist button or in sync 4 ?
it's a new truck and wheni connect my trailer bliss not functionnal.
TRACKTOY

 

[Yves]

Sync 4. You can add your trailer even if it's not connected. You can define more than one trailer then select the one that you will be using when you connect it.

Sponsored