someone explain the forscan camera option?

[Sidwin]

i have a 22 f150 so i'm guessing enable camera at speed is already enabled.

Enable OffRoad (Rock Crawl, Mud/Ruts, and Deep Snow/Sand) Front Camera at Speed i was thinking of adding this option. I'm guessing when i have the car set for offroad the front camera will come on?

Thanks!

Sponsored

 

[My42waffles]

I think its more that you will have the ability to use the camera while driving not that its always on.

 

[JIMFOUNTAIN]

i have a 22 f150 so i'm guessing enable camera at speed is already enabled.

Enable OffRoad (Rock Crawl, Mud/Ruts, and Deep Snow/Sand) Front Camera at Speed i was thinking of adding this option. I'm guessing when i have the car set for offroad the front camera will come on?

Thanks!

Yes. After you enable front camera at speed

Enable OffRoad (Rock Crawl, Mud/Ruts, and Deep Snow/Sand) Front Camera at Speed

IPMA

706-02-02

xxxx

xF03

xx--

then when you turn the mode knob to Rock Crawl, Mud/Ruts, and Deep Snow/Sand then the front camera comes on and the camera shows you where your tires will be. Turning the steering wheel causes the image to move accordingly.

 

[hotrodmex]

the front camera comes on and the camera shows you where your tires will be.

To add, it will also show the tire path on the 360 cam view if you change it from Front to Front and 360.

 

[kjcili24]

Yes. After you enable front camera at speed

Enable OffRoad (Rock Crawl, Mud/Ruts, and Deep Snow/Sand) Front Camera at Speed

IPMA

706-02-02

xxxx

xF03

xx--

then when you turn the mode knob to Rock Crawl, Mud/Ruts, and Deep Snow/Sand then the front camera comes on and the camera shows you where your tires will be. Turning the steering wheel causes the image to move accordingly.

How do you "Enable Front camera at speed"??? I've looked and don't see it. Thanks

 

[JIMFOUNTAIN]

Use Forscan to update the IPMA 706-02-02. See the Forscan thread for details.

https://www.f150gen14.com/forum/threads/2021-f-150-forscan-list-database-spreadsheet.1578/

 

[CaptBlondeBeard]

Has anyone successfully done this change? What were the original values?

I just went into for scan to make this change and my values already match the spreadsheet (cameras still don't work at speed though)

 

[antho]

Has anyone successfully done this change? What were the original values?

I just went into for scan to make this change and my values already match the spreadsheet (cameras still don't work at speed though)

The front camera view? You have to have the truck in a offroad mode for the front camera to come on at speed.

 

[Korça]

The front camera view? You have to have the truck in a offroad mode for the front camera to come on at speed.

I enabled the offroad front camera at speed. It works but all of the offroad modes on my truck enable 4H or 4L and they lock the differential. I don't want that to happen at speed on pavement. Has anyone found an alternate way to allow the front camera to operate at speed?

 

[hotrodmex]

I enabled the offroad front camera at speed. It works but all of the offroad modes on my truck enable 4H or 4L and they lock the differential. I don't want that to happen at speed on pavement. Has anyone found an alternate way to allow the front camera to operate at speed?

This only works in the off-road modes for the front cam over 7 mph.

In the other modes, under 7 mph you just hit the camera button and you get the front cam. Over 7 mph and you just get the rear cam.

Sponsored