Show me your leveled trucks!

[RocketPack12]

2022 Lariat 3.5eco Max Tow. 285/65/20 Falken Wildpeak AT3w's.

Had a 2.5" leveling kit installed. Thought it almost looked nose high. So then I installed Bilstein 5100's in the rear thinking it would raise the back end slightly. It actually dropped a 0.5" which made it look worse. Finally I installed a 2" block in the rear replacing the oem block. So after all of that, I finally like the stance.

I like your truck and mine is similar. I have stock wheels and tire size. Do you notice much difference with a heavy tire? That's my main concern is adding 15lbs per tire.

Sponsored

 

[Mjackson704]

2022 XLT 5.0
Fox 2.0s
295/70/18

It's is awesome... did you do the front and rear fox kit? Do you have any rake left? And are those the method mt305s? If so what offset are they?

 

[bcb97]

I like your truck and mine is similar. I have stock wheels and tire size. Do you notice much difference with a heavy tire? That's my main concern is adding 15lbs per tire.

Not really. I’ve gotten where I don’t have much of a lead foot anymore. I wanted some rake because I do frequently tow on the weekends and so far it’s a very minimal change. Mpg went down some but it’s also a truck and don’t really watch it all too closely.

 

[first150]

It's is awesome... did you do the front and rear fox kit? Do you have any rake left? And are those the method mt305s? If so what offset are they?

Yes Foxs on both front and back. I don’t think they were set at stock out of the box, so I ended up with about 1/8” rake left.

And yes, Method 305 with 18 offset. They have some with 0, but I wanted to stay close to edge of the truck.

 

[Mjackson704]

Yes Foxs on both front and back. I don’t think they were set at stock out of the box, so I ended up with about 1/8” rake left.

And yes, Method 305 with 18 offset. They have some with 0, but I wanted to stay close to edge of the truck.

This is one of the best looking trucks I've seen in a while. Last questions.. what makes you think they weren't at the factory settings and, what size tires and, do they rub?

 

[2021ColFbn]

2.5” level
Stock 18s +44 offset
285/75r18 (34.8x11.2) Kenda Klever R/T
Zero rub full lock. Fit like a glove
2.7 ecoboost 3.55 gear

honestly the ride is the same re: power and pickup.
Happy with the build so far

 

[first150]

This is one of the best looking trucks I've seen in a while. Last questions.. what makes you think they weren't at the factory settings and, what size tires and, do they rub?

Thank you.

I think I got more than 2” in the front. I bought them as open box off of americantrucks.com so it’s possible they may have been adjusted.

I went with 295/70/18 Toyo Open Country AT3s. No rubbing, and they actually have about an inch or so of breathing room.

 

[sortego5]

I put a 2.5" level on front and it still looks like it can go up another 1" to be truly level. Then i heard that the back wheel well is larger than front? I'll get pic shortly.

 

[Graygoose2021]

I put a 2.5" level on front and it still looks like it can go up another 1" to be truly level. Then i heard that the back wheel well is larger than front? I'll get pic shortly.

yup the are bigger, kinda misleads some , looks worse than really is.

 

[23platBAP]

2023 3.5 platinum with max tow. Installed Fox 2.0 coilovers and shocks and still have about 2” of rake. I had almost 4” of rake stock. 285/65r20 KO2 on the stock wheels

 

[Graygoose2021]

2023 3.5 platinum with max tow. Installed Fox 2.0 coilovers and shocks and still have about 2” of rake. I had almost 4” of rake stock. 285/65r20 KO2 on the stock wheels

Beautiful truck!

 

[vinnie45acp]

2022 XLT Sport Space White
2.5" Pro Comp Level
285/60 R20 on stock Sport 20"s

Any rubbing or trimming with that wheel set up and level kit? What was your drop in MPG from stock?

 

[Joe_Lee]

2.5” level spacer up front. Factory rake was 3.25” and now have .75” rake which is what I was hoping for.
275/65R20 Recon Grapplers on stock 20s.

 

[Fab_r6]

Tires are 285/70/17. I have the Bilsteins at the max height but due to the powerboost being heavier than the other engines, the 2.5” setting only gave me about 2”. I plan on either getting heavier springs or switching to the 13th gen 6112 in the future but for now it rides ok.

Do you think if it would of gave you the true 2.5 in lift if it was not a PB. Would it have been true level or slightly higher in front ?

 

[Fab_r6]

Do you have any more pictures

Sponsored