Request VIN Lookup Thread

[2BigDogs]

Hi, can you check if I have any additional updates queued up.

Thanks!

1FTFW1ED0PFA72687

Sponsored

 

[1TG]

Hello.

Had my APIM replaced but still having issues. Is someone able to look up my VIN and see what updates are outstanding for all modules?

VIN: 1FTFW1E89NFB72075

Many thanks!

 

[Caneman88]

1FTFW1ED8MFA85585
Just looking for a look up please see if I need to hook up the Mongoose again.
Thanks in advance deciding whether or not to pay for 3 years of BlueCruise on a 2021 Platty with 52,000 miles

 

[rugedraw]

Can anyone please check if I have any update in FDRS?
1FTFW1E51MFC37912
Thanks

Nothing showing in FDRS at this time.

Hi wondering if you could look up any missing updates or module updates missing, and also if I have the FAJAK code, rear brakes squeal every AM, car is at the dealership today. thank you
1FTEW1E8XNFA81411

Hi, can you check if I have any additional updates queued up.

Thanks!

1FTFW1ED0PFA72687

No updates pending OTA; these two showing in FDRS.

Hello.

Had my APIM replaced but still having issues. Is someone able to look up my VIN and see what updates are outstanding for all modules?

VIN: 1FTFW1E89NFB72075

Many thanks!

I see the APIM was replaced on 10/2 and the the PMI was done correctly from what I can see. Modules pending updates are below. What issues are you having?

 

[rugedraw]

1FTFW1ED8MFA85585
Just looking for a look up please see if I need to hook up the Mongoose again.
Thanks in advance deciding whether or not to pay for 3 years of BlueCruise on a 2021 Platty with 52,000 miles

Modules pending updates are below. Hold off on FDRS. They started releasing the last bits of updates needed for BC 1.4 last night, but only for 2023 trucks. Save the $50 for when you are showing IPMA, PSCM and APIM updates.

 

[jrob1510]

Evening,

I had my APIM replaced yesterday because OTA updates were not working for sync. Here’s what my truck is saying for the sync version
SYNC 4, Software Version: 21146_PRODUCT
Revision: 145

I know I just had the APIM replaced and may have to wait, but I’ve been trying to get my truck to update for 2.5 years.
Is someone able to look up my VIN and see what updates are outstanding and if any are pending?

VIN: 1FTFW1E86MKE10874

I really appreciate it!

 

[Kidastra]

thank you, i just got the truck back and they said they updated the pcm, for my hard shift issue, i'm sure it takes some time to show the update. Didn't realize there were that many modules not up to date

 

[2BigDogs]

No updates pending OTA; these two showing in FDRS.

Thank you rugedraw!! I updated a bunch of modules via FDRS on 12/19 and am currently at Sync version 23291. Before spending another $50, do you think these would be the last updates needed to upgrade to BC 1.4?

 

[1TG]

Nothing showing in FDRS at this time.

No updates pending OTA; these two showing in FDRS.

I see the APIM was replaced on 10/2 and the the PMI was done correctly from what I can see. Modules pending updates are below. What issues are you having?

The original issues were:

- Headlight system error
- turn signal sound not audible but signal flashed normal
- turn signal hyper flash inside, but outside regular
- sync not maintaining settings
- pressing fan speed down would initiate voice command prompt
- my view menu in instrument cluster reseting on its own

Now:

- the headlight system error has come back
- parking/front proximity sensor error eventhough nothing is impeding them
- my view menu reset itself again

Is there a way to tell if those pending updates were released after the APIM was replaced or if they were pending before that?

 

[rugedraw]

Thank you rugedraw!! I updated a bunch of modules via FDRS on 12/19 and am currently at Sync version 23291. Before spending another $50, do you think these would be the last updates needed to upgrade to BC 1.4?

Those updates are for BC 1.4, but there is something still needed for it to be activated. I think maybe an APIM update to add the toggle switches the the touchscreen. I know of one guy on another forum that did these updates, and he did not get the additional features from the new BC. I would wait a bit.

 

[rugedraw]

The original issues were:

- Headlight system error
- turn signal sound not audible but signal flashed normal
- turn signal hyper flash inside, but outside regular
- sync not maintaining settings
- pressing fan speed down would initiate voice command prompt
- my view menu in instrument cluster reseting on its own

Now:

- the headlight system error has come back
- parking/front proximity sensor error eventhough nothing is impeding them
- my view menu reset itself again

Is there a way to tell if those pending updates were released after the APIM was replaced or if they were pending before that?

There is no way to go back to see what updates were available on a certain date. I don't have a good explanation for the issues you are having, but on 12/19 your truck started recording some headlight DTC's as seen below.

 

[1TG]

There is no way to go back to see what updates were available on a certain date. I don't have a good explanation for the issues you are having, but on 12/19 your truck started recording some headlight DTC's as seen below.

Sounds good. Many thanks for the help. I'll book it in with the dealer to get things looked at.

Thanks again!

 

[red5_0]

So I just got this. Does that mean my other modules are updated? 1FTFW1E81PFB36934

 

[ENG430]

Could any one please check my friend vin in FDRS.
Raptor R
1FTFW1RJ8PFB53940
Thanks in advance

 

[nsbreeding]

I know my truck is WAY behind, I'm looking for the over the air updates for VIN 1FTFW1E81MFB62283 - a screenshot so I can prove to the Ford tech that my truck is VERY far behind, would be great! (thanks for all your help)

Sponsored