Rear Tailgate Camera

[Facemelter]

Picked up my new 22 XLT at the beginning of this month. On the way back to the dealer, I was messing with the camera button watching some idiot behind me. It worked perfectly fine driving 45+ mph.

Get to the dealership to pickup the new tonneau cover I ordered and chat with the parts guy for about 30 minutes.
Hop back into the truck and head home. I click the camera button back on and it throws the message up on the screen "For your safety, some features have been disabled".

It worked perfectly fine on the way to the dealership. Leaving the dealership it threw that message and has not worked since. The camera will turn on below 5 mph, but goes right back off above 5.

Any ideas?

Sponsored

 

[Porpoise Hork]

May have pulled an OTA update and disabled the cameras at speed setting. You can check the coding and re-enable it with Forscan fairly easily.

 

[Facemelter]

May have pulled an OTA update and disabled the cameras at speed setting. You can check the coding and re-enable it with Forscan fairly easily.

Didnt know I could check coding. I guess I verify by current asbuilt data and check it against what it's displaying in Forscan?

 

[Porpoise Hork]

It depends. If the AsBuilt on the Ford tech site already updated then it would match the truck. If you previously changed the setting with Forscan, you can look at what it is now, compared to the local backup save of the module (if you have one) or to the Forscan codes spreadsheet that enable it and see what if anything changed. If everything is still set to allow cameras at speed, try resetting the module with Forscan and see if that fixes it.

 

[Facemelter]

Yeah I never changed anything on that side of forscan. Only enabled bambi mode. Ya know what, I saved the original AsBuilt data on a spreadsheet when I was tracking the trucks movement through the order process.
Hah, I'll check that out when I get home today. Thanks Porpoise!!

 

[Porpoise Hork]

Anytime. Hope you get it figured out.

Sponsored