Raptor LED Taillight Swap

[crazywayne311]

Find me a price first ?.. but sure yeah. At least knowing part numbers.

I also want a set of bap/tremor headlights, but still undecided. The hardest problem with those is finding undamaged ones.

you and me both! I’d love a set of BAP front and rear lights

Sponsored

 

[Arvin]

I had to change the coding with ForScan. I found a VIN for a 2021 Raptor and looked up the as-built data to compare it to my truck. The coding had to be changed to “stop & turn” in two lines of coding for the left and right sides.

Bro whats the forscan code you used?

 

[BarryT82]

Bro whats the forscan code you used?

You don’t have to change it in the long coding. You can change it just like I did in the photo.

 

[spacewhite_3.5]

I had to change the coding with ForScan. I found a VIN for a 2021 Raptor and looked up the as-built data to compare it to my truck. The coding had to be changed to “stop & turn” in two lines of coding for the left and right sides.

I just did the swap to the raptor taillights, made the changes supplied with the adapter harness in FORScan but still getting the hyperflash. I’m only getting if I’m stepping in the brake and have the turn signal on. I’ve tried the setting you have in the photo but still getting the same results. Just wondering if you did something else or not besides those changes?

 

[antho]

I just did the swap to the raptor taillights, made the changes supplied with the adapter harness in FORScan but still getting the hyperflash. I’m only getting if I’m stepping in the brake and have the turn signal on. I’ve tried the setting you have in the photo but still getting the same results. Just wondering if you did something else or not besides those changes?

Did you swap from halogen tail lights? Assuming that’s why you have a harness?

 

[spacewhite_3.5]

Did you swap from halogen tail lights? Assuming that’s why you have a harness?

Yeah! I swapped the halogen for the LED Raptor taillights.

 

[BarryT82]

I just did the swap to the raptor taillights, made the changes supplied with the adapter harness in FORScan but still getting the hyperflash. I’m only getting if I’m stepping in the brake and have the turn signal on. I’ve tried the setting you have in the photo but still getting the same results. Just wondering if you did something else or not besides those changes?

You may have a harness issue. If the coding saved properly it should be fine. Your truck doesn’t have onboard scales does it? If so, that would be the cause of this issue.

 

[spacewhite_3.5]

You may have a harness issue. If the coding saved properly it should be fine. Your truck doesn’t have onboard scales does it? If so, that would be the cause of this issue.

It doesn’t have the OBS!

 

[fordtruckman2003]

Throwing an adapter harness into the mix and not having LED from factory you'll likely need different settings. The settings changed here are for swapping LED to Raptor LED. There is another setting to change the bulb detection you might need to change when going to LED but that's just a guess.

 

[spacewhite_3.5]

Throwing an adapter harness into the mix and not having LED from factory you'll likely need different settings. The settings changed here are for swapping LED to Raptor LED. There is another setting to change the bulb detection you might need to change when going to LED but that's just a guess.

That makes senses! I will see what I can’ find! I have some changes that’s came with the adaptor but so far same results when I’ve input them.

 

[GypsyDanger]

That makes senses! I will see what I can’ find! I have some changes that’s came with the adaptor but so far same results when I’ve input them.

Did you ever get it figured out? I'll be doing this same swap and would appreciate any info on what you learned.

Sponsored