PPE deep pan. Anyone install one?

[ApolloChurchill]

I guess I got lucky. I did mine without having to remove anything

Sponsored

 

[rr11]

Anyone installed a deep pan and the transmission skid plate?

 

[Chaos150]

Also did anyone have issues torquing the bolts on the pan? I may have got a couple to torque down but most just kept going so I just stopped. Tried one more yesterday to make sure and snapped the head off that one and said F this job for right now.

 

[jhelrey]

Also did anyone have issues torquing the bolts on the pan? I may have got a couple to torque down but most just kept going so I just stopped. Tried one more yesterday to make sure and snapped the head off that one and said F this job for right now.

What are you torquing them to?

 

[Chaos150]

One video I saw said 96in lbs. but doing more research I saw 89in lbs

 

[Dbn23]

Anyone installed a deep pan and the transmission skid plate?

I have a Grimm off-road transmission skid with my deep pan. There’s still about 2” of clearance.

 

[Chaos150]

Put the new pan in everyone. Came out badass. And I was easily able to get that bolt that broke off. Everything came out great.

 

[roadPilot]

Did this upgrade on my '21 5.0 a couple weeks ago. Those two bolts for the trans and a few on the exhaust hangers allowed me to lift the trans just enough to get the pan in. I did use a block of wood to help get just a few extra MM between the exhaust and the trans. Looks great and now I can do trans fluid changes with ease!

Don't forget to change front and rear diff and transfer case oils. I also did a rear diff PPE cover with drain bolt.

Sponsored