Noisy rear end after 2" block lift

[DPHILLIPS8503]

So any luck ? I’m still making noises. FML . I’ve even gone passed the torque spec of 111 to 130 LB ft . Nothing

My shock bushings were trashed, so the bolt/metal sleeve was bouncing around in the eyelet. Swapped them out for some RC V2 shocks and everything’s gold again! Getting the bushings fixed on the foxes.

Sponsored

 

[Cooder_Graw]

FML . Found it ! After doing it for the 7th time and this time removing the shock .

 

[DPHILLIPS8503]

FML . Found it ! After doing it for the 7th time and this time removing the shock .

Same problem?

 

[Cooder_Graw]

Yeah that been the noise the whole time

 

[DPHILLIPS8503]

Yeah that been the noise the whole time

Glad you got it figured out too! Had me ready to pull my damn teeth out lol

 

[Vin]

FML . Found it ! After doing it for the 7th time and this time removing the shock .

How'd you fix it?

 

[Cooder_Graw]

No clue. Still looking. My buddy sent me a utube of a gmc with the same problem and he’s solution was some rubber in there . So I’m going to get a 3 in rubber strip with adhesive. If that doesn’t work . Rag in the gas tank and a lighter.

 

[TheGoatman]

Don’t know anything but maybe they need to be crimped down tighter to remove the play but not too much to drag when sliding when cycling. Don’t know much about that, so take with a grain of salt.

Nice find!

Sponsored