IPMA Update fail

[HammaMan]

FWIW -- As long as you've got more than 10 volts, modules will flash. Some things stop responding below 10 volts. Sync will deep sleep when on in the low 10v. Had an IPMA take a flash at 9.7v. Shouldn't be even remotely an issue w/ F150 and 15a charger connected. Watch out for the BEVs though.

Sponsored

 

[Stefanolimotta]

Hey can any one point in the right direction I’d like to know how to up date my ipma and apim was wondering if I can do it on forscan and where I can get the file to do so. Any insight would be much appreciated.

 

[Eds pb platinum]

Hello software gurus,
I used fdrs to update software and clear dtcs on various modules. At end of ipma
about 3 hours I may have missed a message didn't finish as normal. When I
tried to download again kept getting a restore DEOx_ range exception writing
message. The only module with remaining dtcs is sccm any ideas for my next dive into fdrs. My instrument cluster reboots every 5 to 6 minutes like clockwork, started recently after a trial of blue cruise. Seems like a software time out rather than hardware. I learned a lot in 2 days and with your help look forward to learning more. Had a stop now red lightning bolt warneing at end of day 2 programming used the key fob in cup holder, problem resolved. Thanks again.

 

[Eds pb platinum]

Forgot Vin 1FTFW1ED2MFA98400 if you could let me know where I stand.

Sponsored