Introducing Bluepilot! A Ford specific fork for Comma3X / OpenPilot

[hpwjr]

I also have numerous radar errors that I didn’t have before. I was going to ask about that. Sometimes it will scream three or four times in a row, but it rarely disconnects. It just screams its warning. Hopefully something easy to fix.

Sponsored

 

[Ajzride]

https://bluepilot.dev/2025/08/09/on...-get-radar-errors-when-using-bp-3-x-or-newer/

 

[hpwjr]

Too bad. But I still love my BluePilot. It makes a world of difference on long drives—and the radar warning keeps me awake.

 

[LowCutKilt]

https://bluepilot.dev/2025/08/09/on...-get-radar-errors-when-using-bp-3-x-or-newer/

Thank you Sir

 

[Ajzride]

I'll give that a try tonight! Just from the unit itself or do I have to try to get all the way down to the canbus again? That was a bugger to reach a hand into! lol

I bought the OEM harness and had DrayDay do the modification to it so it wouldn't throw codes - I assume the resistor board is something new since harnesses were being modified?

Thanks for the quick reply!

You can just disconnect at the device.

The resistor board eliminates the need to have a modified harness.

 

[LowCutKilt]

You can just disconnect at the device.

The resistor board eliminates the need to have a modified harness.

Ok awesome. If the disconnect doesn't work i'll look at ordering a stock harness and resistor board for a replacement. Appreciate your help!

 

[Ajzride]

Ok awesome. If the disconnect doesn't work i'll look at ordering a stock harness and resistor board for a replacement. Appreciate your help!

UncleTony on the lightning forum builds the resistors. Order page here:

https://bluepilot.dev/lightning-coupler-order-page/

 

[Ajzride]

I had a ton of ping pong, especially on the interstate at 80 mph - not as bad at 70 mph or below.

what model are you on?

 

[LowCutKilt]

UncleTony on the lightning forum builds the resistors. Order page here:

https://bluepilot.dev/lightning-coupler-order-page/

FoF

 

[Ajzride]

FoF

try going back to WD40.

the logic between 3/4 had very minimal changes. The model is the more likely culprit. Also in Big Sky Country, the effects of cross winds can’t be ignored.

 

[LowCutKilt]

try going back to WD40.

the logic between 3/4 had very minimal changes. The model is the more likely culprit. Also in Big Sky Country, the effects of cross winds can’t be ignored.

Excellent, will give that a try. The days with the worst ping pong were certainly windy days through a very mountainous part of the interstate between Boulder and Helena, so that checks out

 

[Ajzride]

Excellent, will give that a try. The days with the worst ping pong were certainly windy days through a very mountainous part of the interstate between Boulder and Helena, so that checks out

Very little that can be done about windy conditions. BlueCruise can't handle them either.

 

[tcicatelli]

How often do new versions come out? Where can I learn about planned features and improvements? What an amazing piece of technology.

 

[LowCutKilt]

Very little that can be done about windy conditions. BlueCruise can't handle them either.

The unplug it and plug it back in worked for now! No good explanation for why I didn't think to do that first lol Thanks!

 

[Ajzride]

How often do new versions come out? Where can I learn about planned features and improvements? What an amazing piece of technology.

We try not to push updates once things are stable. There is a new release we had hoped to get out by October 1st, but it is running behind.

Sponsored