Installing 15-20 Upper Control Arms on a 2021 F-150?

[Infotroll]

Thanks for the update

Sponsored

 

[Nico]

Hello!

Do we know if prior year uca will fit? Regardless if he needs them or not.

Falcon front and rear shocks are on the way and I would like to find a set that fits, thanks!!!

I have a 2021 F-150. I bought the Camburg tubular upper control arms for the 2015-2020 F-150 as well as the king coil overs for 2015-2020. Everything went on with no issues what so ever. Here are a few pics. Also, the ride quality on road is a huge improvement over stock. I highly recommend.

 

[Mourns]

Quick question does your truck have the Dynamic Bending Headlamps on the control arm?

 

[CREC]

Bump. Any updates on these??

 

[Crabbs]

wondering about this too

 

[goose543]

ball joints are a different size 0n a 2021 and 2022 because the control arms are alluminum not steel they are smaller

 

[Rockman5159]

I just purchased a RC SWB FX4 and just purchased a set of rough country leveling struts. Anyone had any experience or opinions on these? I had a 2020 RC SWB FX4 but put strut spacers on top of OE struts. Rode a bit stiffer. The Rouigh Country 2" leveling struts claim to retain factory ride

 

[Xmerlyn]

Rough Country UCAs fit, but there is no provision for the headlight adjustment sensor found on higher trim levels and a custom bracket must be fabricated to retain its functionality.

Be careful with the sensor mount. Mine broke off at install and I had to weld it back on. I did not bother with a return, simple fix if you have a MIG at home.

 

[owen2020]

Hey everyone,
I'm reading everyones posts and it looks like the 15-20 model UCA fits with the 2021s? I plan on doing a 6inch rough country vertex lift and crank them up to 7inch with BDS or Zone UCAs. Just wondering how everyones UCAs from 15-20 are holding up on the 21s?

 

[Cairo]

I'm planning to buy a Bilstein 6112 kit, but it only lifting by 2.5". Is there any point in installing struts with it so that the lift is about 3"? What UCAs would be best then?

 

[travisN000]

I'm planning to buy a Bilstein 6112 kit, but it only lifting by 2.5". Is there any point in installing struts with it so that the lift is about 3"? What UCAs would be best then?

I've seen mixed reports on adding spacers to a 6112 strut kit; some say its harsh others say not.

Another option would be to replace the knuckle with a taller one from a ford tremor, icon, or rough country (RC only sells it with the strut kit on the site, but try calling? )

Sponsored