*HELP* Halogen to Reflector LED Swap Not Working

[blk_lightning]

OK.. I cant tell what you have at the values you have x'd out.


726-72-01: 0001-0000-01xx This is for the DTCs. You may already have these values. I dont know what you have other than what you have pasted.

Tried the 726-72-01: 0001-0000-01xx but still have same result.

Sponsored

 

[blk_lightning]

OK may have found my problem. Relay needs to be mounted to a fuse box stud. I currently have it mounted to body ground. Going to make the switch this afternoon and check back.

 

[blk_lightning]

OK this was definitely an error on my part. The relay needed to be connected to a stud on the under hood fuse box. Problem solved. Thanks for the help.

 

[dolsen]

OK this was definitely an error on my part. The relay needed to be connected to a stud on the under hood fuse box. Problem solved. Thanks for the help.

Lol glad you got it fixed. I almost made the same mistake when I installed mine. So I know how easy it is to mix up if you don’t understand electrical very well (at least I know I didn’t at the time)

 

[STX2021]

Was this ever sorted out? I have the same issue. I made an in depth video on the conversion from halogen to LED but can't post it yet since the DRLs aren't working. Any insight would be appreciated.

 

[Davidwnuc]

Was this ever sorted out? I have the same issue. I made an in depth video on the conversion from halogen to LED but can't post it yet since the DRLs aren't working. Any insight would be appreciated.

Read the 2 posts before yours

 

[shelbygibbs]

I did the same thing on my conversion. Didn’t read that part of the instructions well and just assumed they were all grounds.

Sponsored