ECU module programming guide using FDRS

[Ajzride]

I am currently giving it about an hour this time around to see if it helps, but is there anything else I should be doing?

Make sure all keys are as far away from the truck as you can get them inside. I left the spare hanging by the garage door and it was close enough to keep the truck awake.

Sponsored

 

[Ajzride]

If I do this on my own I would need the mongoose interface and a laptop. I was thinking since I don’t have a laptop can I just use a long extension cable to my pc?

you need a powered adapter for a run that long. It’s actually better to setup the desktop in the garage or driveway (canopy recommended). Long CAT5 cables or USB WiFi adapters are cheaper and more reliable than USB extenders.

 

[jeffm4688]

Make sure all keys are as far away from the truck as you can get them inside. I left the spare hanging by the garage door and it was close enough to keep the truck awake.

didn't realize the truck had to be asleep with the key away from it (i leave the key in the truck full time), so I am supposed to just leave the door open and wait for it to go to sleep and it'll do the update?

 

[JJ_Tex]

you need a powered adapter for a run that long. It’s actually better to setup the desktop in the garage or driveway (canopy recommended). Long CAT5 cables or USB WiFi adapters are cheaper and more reliable than USB extenders.

+1 on this. I used my desktop and a powered USB cord on mine and had no issues. I was even able to work on Friday with FDRS doing its thing in the background.

 

[jeffm4688]

didn't realize the truck had to be asleep with the key away from it (i leave the key in the truck full time), so I am supposed to just leave the door open and wait for it to go to sleep and it'll do the update?

replying to myself here, but I did attempt this and still a no go, the system would of automatically handled any other updates which would of needed to be done before APIM right?

I just turned the truck on, it boots up says update ready please restart and I turned it off and left the door open. going to try and leave it for an hour, the key is with me inside as it was last time. I was already on 2.3.0 (so latest not including early access) if that matters

 

[Ajzride]

didn't realize the truck had to be asleep with the key away from it (i leave the key in the truck full time), so I am supposed to just leave the door open and wait for it to go to sleep and it'll do the update?

close the door, lock the truck, hide the key. Wait 20 minutes.

 

[jeffm4688]

close the door, lock the truck, hide the key. Wait 20 minutes.

awesome, this did it, apim finally took, waiting for tcu now.

 

[jeffm4688]

tcm done, gpm done. a new ipc update popped up. I figure after this IPC update I will be good for bluecruise except for this stupid abs update.

abs wants me to update to G2199389-5.0 and I click the update, it does everything perfect, ends with telling me to turn the car off and I restart it and boom it acts like I never did the update. Very odd.

 

[charliecbp]

What is the best way to save the current as built file before starting the updates with FDRS, I can't find anything to open them once downloaded

 

[JEB]

close the door, lock the truck, hide the key. Wait 20 minutes.

This was probably a safe method, but there is a more predictable one.

First, it doesn’t matter where you leave the key fob. If the truck is secure (in the garage), you can leave the fob in the cupholder. If it isn’t secure, take it out of your pocket and leave it in a secure location. The trick is to not allow the fob to approach the truck during shutdown. The approach triggers the proximity sensors, which keeps the truck awake.

Second, 20 minutes is probably sufficient but if you want a visual cue as to when the truck has actually shut down and the relays have reset, look in the back window (don’t open any doors) and look at the LED halo around the rear seat USB ports. If the halo is dark, the truck has shut down. If not, wait longer.

 

[Dinozero]

What’s the lowest cost someone could get into doing this for their truck for?

 

[speedracercjr]

What’s the lowest cost someone could get into doing this for their truck for?

$500 for the mongoose, $50 for a two day license.

Or if you have someone nearby that has an adapter that works (not the VCX Nano) you'd just need the FDRS license for $50

 

[Fordphanatic]

What’s the lowest cost someone could get into doing this for their truck for?

It depends do you have the hardware for blue cruise

 

[BHunted1]

What is the best way to save the current as built file before starting the updates with FDRS, I can't find anything to open them once downloaded

Index - FordServiceInfo.Com (motorcraftservice.com)
Then date it if you wish and change name by adding.xml to the end.

 

[Dinozero]

It depends do you have the hardware for blue cruise

I have an XLT 302A loaded. Got the 360cams and adaptive cruise.

No blue cruise.

Sponsored