B&O unleashed subwoofer Poly fill and Dynamat

[F150Platinum22]

Tried to find this , but had no luck, has anyone put poly fill inside your 2022 B&O unleashed subwoofer enclosure, or put dynamat on the outside of the enclosure? Ive also seen some door block off covers from sounds good stereo. I put poly fill in my 2011 subwoofer enclosure, made a huge difference.
Just wondering if anyone has tried these mods.
Thanks in advance.

Sponsored

 

[B-real]

Tried to find this , but had no luck, has anyone put poly fill inside your 2022 B&O unleashed subwoofer enclosure, or put dynamat on the outside of the enclosure? Ive also seen some door block off covers from sounds good stereo. I put poly fill in my 2011 subwoofer enclosure, made a huge difference.
Just wondering if anyone has tried these mods.
Thanks in advance.

Have you looked at the B&O "sub"? I dont think you can fit any poly in that "enclosure"

 

[Graygoose2021]

Door plates should help give more midbass, the Dynomat will help if it resonates.
Polyfill, "may" if you can get some in there, trick the sub into thinking its in a larger enclosure. But most of the time, or sometimes, it doesn't help as the EQ is set for the enclosure its in. May not change it as much as one would think.

 

[antho]

I would recommend you go look at your sub. Not much to do with it.

 

[F150Platinum22]

Have you looked at the B&O "sub"? I dont think you can fit any poly in that "enclosure"

I have seen it, but I haven’t pulled the sub out yet, may take a look this weekend.

 

[B-real]

If you really want to make any additional bass, the only real option is to replace the stock one with a new powered unit. It is on my list, but I need to actually get the truck first.

 

[F150Platinum22]

If you really want to make any additional bass, the only real option is to replace the stock one with a new powered unit. It is on my list, but I need to actually get the truck first.

True, I think the stock will be enough for me for now with a little adjustment, then maybe change out some speakers later.
I got my 22 platinum in about three months exactly last year, how long ago did you order yours?

 

[B-real]

True, I think the stock will be enough for me for now with a little adjustment, then maybe change out some speakers later.
I got my 22 platinum in about three months exactly last year, how long ago did you order yours?

Long story, but ordered Feb. of 22. It arrived in Oct of 22 but was sold out from under me, so the dealership just had a 23 come in that I can get, after it gets through PDI and if I can now sell my 17, which has taken a hit in market value of $5k since Oct, when I should have sold/traded it.

 

[superfordman]

I believe you're thinking more of the last gen subs, those were actual enclosures you could fill and dynamat to help out a little. These new ones are weird oval little dinky things that vent to the outside. If you want to do anything, throw it in the trash and go all aftermarket, lots of options out there.

 

[F150Platinum22]

Long story, but ordered Feb. of 22. It arrived in Oct of 22 but was sold out from under me, so the dealership just had a 23 come in that I can get, after it gets through PDI and if I can now sell my 17, which has taken a hit in market value of $5k since Oct, when I should have sold/traded it.

That stinks, good luck.

 

[antho]

Just fold the back passenger seat down and you can see it. It’s not really in a box. It ports to the cab wall.

 

[sippy2]

Just for giggles I took mine apart and fully line the inside with Resonix CLD.(wish I would have stuffed with polyfil as well)

Results were....bass seemed tighter and less boomy. No increase in output though. IMHO worth the very small effort it took. I cut the cld in small pieces as to fit the odd shapes of the interior.

 

[F150Platinum22]

Just for giggles I took mine apart and fully line the inside with Resonix CLD.(wish I would have stuffed with polyfil as well)

Results were....bass seemed tighter and less boomy. No increase in output though. IMHO worth the very small effort it took. I cut the cld in small pieces as to fit the odd shapes of the interior.

I may have to check that out, I haven’t had time to look at mine yet.

Sponsored