B&O Unleashed Front Center Speaker Disable

[opiekelly]

Hello all, first thanks to #Livnitup and members for the Forscan spreadsheet. I want to disable the front center speaker via Forscan, however the current ACM tab for 2021+ seems to be for the standard B&O.

I went to set the following and at that address and digit my truck is coded with a "B". The table would indicate "SO Speaker and Tweeter • SCO No Speaker Connected"

Speaker 2 Output (SO) • Speaker 6 Center Output (SCO)

727-01-01

xxx*

xxxx

xx--

Is there an ACM document for B&O Unleashed?

Thanks
Brendan

Sponsored

 

[pelon222]

Maybe take a look at this other one
Speaker 4 Output (SO) • Subwoofer (S) • Center (C)

727-01-01 xxxx x*xx xx--

 

[JJSnell]

Why not just physically disconnect it? It would take you probably 90 seconds to do it. I did it to test what others are doing to "better" the sound experience but didn't care for it and plugged it back in.
Each time it only took me a minute or two. Very easy to do

 

[opiekelly]

I just did the old school method of popping the cover and disconnecting the speaker. Was hoping I could do this via coding. I also want to play with EQ settings so I wanted to make sure Livnitup's spreadsheet worked for B&O unleashed.

Sponsored