Nice! Cam comes on now, no more stopping to turn it on! The cam turns off as soon as you hit the brake and goes back to main screen. Comes on again as you release and have forward motion. Anyway to set the delay to leave them on until park or gear shift (like the rear or oldstyle setting for proximaty did)?
not that i am aware of
He's wired differently than most.
Gotcha. That would allow you to check for DTC’s that could be a problem. Have you manually selected and reviewed your cameras in Sync to make sure they all work? If they do, best case scenario is you buy the OBD adapter and update the setting unless you want to go to a dealer. It is the best $60 you can spend on your truck!
Your truck has been throwing out some codes consistently, one being a camera module and losing communication with the BCM and APIM. I am not a technician, so I can't say this is the reason why, but you do have some DTC's that are conducive with possible camera issues.
Awesome, thanks. Just ordered a cable off Amazon. Will get into the FORscan stuff this weekend to check.Your truck has been throwing out some codes consistently, one being a camera module and losing communication with the BCM and APIM. I am not a technician, so I can't say this is the reason why, but you do have some DTC's that are conducive with possible camera issues.
However, upon months of checking people's trucks and my own, these trucks are CONSTANTLY spitting out DTC codes even when the truck seems to be working 100% fine. I stopped checking my own DTC's because I was just getting in my own head looking at them. lol Before I take it to the dealer, I would get the OBDII tool, download FORscan and see if the camera setting Jesse just described can be changed as per his instructions. If you go in there and see you already have the "B" in that line and not the "3", then you can consider a trip to the dealer. Either way, there are some cool mods you can do to your truck with FORscan and more coming out as people discover them, so it is good to have anyway.
Excellent post!Your truck has been throwing out some codes consistently, one being a camera module and losing communication with the BCM and APIM. I am not a technician, so I can't say this is the reason why, but you do have some DTC's that are conducive with possible camera issues.
However, upon months of checking people's trucks and my own, these trucks are CONSTANTLY spitting out DTC codes even when the truck seems to be working 100% fine. I stopped checking my own DTC's because I was just getting in my own head looking at them. lol Before I take it to the dealer, I would get the OBDII tool, download FORscan and see if the camera setting Jesse just described can be changed as per his instructions. If you go in there and see you already have the "B" in that line and not the "3", then you can consider a trip to the dealer. Either way, there are some cool mods you can do to your truck with FORscan and more coming out as people discover them, so it is good to have anyway.
