2023 ford ipma programing

[autorepair]

Hi everyone ok here it goes 2023 ford f350 i know this is f150 forum but it seems like there is a lot of knowledge here so here is what i got going on i went to replace the ipma module because my 360 cameras were not working thinking that was the problem and i installed the used ipma module and went to do pmi with fdrs and i think fdrs took the configuration of the used module the used module was the wrong part number and now im thinking was not my problem so i put the original module back in and i had all kinds of communication codes so i ran pmi on the original module and now i have all kinds of codes in the pcm abs and gatway module and the ipma
ipma codes c1001-b1385-u0100-u0121-u211b
pcm codes u023a-u045a-u3035
gatway module codes u211b-u211c
abs codes u0146-u0159-u023a-u211b
i try and run tron network repair and it always fails with error code 26 I'm thinking the flash is the or the as built is wrong when i read the as built with forscan and compare it to motor craft website it looks the same as what forscan pulls out what am i missing here becouse befor all of this only thing wrong was just 360 cameras would not display a image now i have no park assist and revers braking error and i cant pull up the 360 view on the radio thanks for your time

Sponsored

 

[Shane150]

@Jesse-Infotainment @HammaMan @rugedraw

 

[HammaMan]

TRON's syncing requires a dealer FDRS login. You cannot swap an encrypted module without having the dealer's login to run the encryption initialization step. There are some here who have such a login, I'm not one of them.

 

[autorepair]

hey thanks guys i really appreciate it

Sponsored