2021+ F-150 FORScan List / Database / Spreadsheet

[HiluxHavoc556]

Having trouble with global windows on a model year 21. Here is what my modules are showing. Anyone got any ideas? Thank you.

DDM

740-06-02 010A 0000 015B

740-06-03 0100 0000 0152



PDM

741-06-02 010A 0000 015C

741-06-03 0100 0000 0153



BCM

726-11-02 0001 0001 0042

726-22-01 0000 0000 0151

726-22-02 0000 0000 0152

Sponsored

 

[SilverPigeon]

@HiluxHavoc556 Ian, all those look good. Have you added in the APIM switches? They may default to off if not configured. APIM:

7D0-09-01

xxxx

x*xx

xx--

Global Window Open (GWO) • Global Window Close (GWC) • Daytime Running Lamps Control Function (DRLCF) • Temporary Mobility Kit (TMK)

What's your value there?

You can also reboot all those modules in service procedures to be sure.

 

[HiluxHavoc556]

@HiluxHavoc556 Ian, all those look good. Have you added in the APIM switches? They may default to off if not configured. APIM:

7D0-09-01

xxxx

x*xx

xx--

Global Window Open (GWO) • Global Window Close (GWC) • Daytime Running Lamps Control Function (DRLCF) • Temporary Mobility Kit (TMK)

What's your value there?

You can also reboot all those modules in service procedures to be sure.

I will have to check this but I did reboot all of the modules.

 

[Carnious]

Having trouble getting chimes to stop in my 2025.
not sure if they are key in ignition or door ajar chimes, but I feel like I’ve disabled both.
anyone else have issues turning this off? The chimes you hear when you first get in the truck

 

[SilverPigeon]

Having trouble getting chimes to stop in my 2025.
not sure if they are key in ignition or door ajar chimes, but I feel like I’ve disabled both.
anyone else have issues turning this off? The chimes you hear when you first get in the truck

Check you have all of these set:

Disable driver & passenger seatbelt minder	IPC	720-01-01	xxxx xx6x xx--	xxxx xx0x xx--
Disables door ajar chime (0=12-hour time, 4=24-hour time	IPC	720-01-02	xx0x xx--	xx4x xx--
Disable key-in ignition chime	IPC	720-02-01	xxEx xxxx xx--	xx6x xxxx xx--
Disable Ignition / Start Engine Chime Seatbelt Not Latched using SWM = ECE	IPC	720-01-02	xxxx x0--	xxxx x2--

column 4 is before, column 5 is after. If you have a different "before" either look at what it should be or I can give you the new value if you give me the current one. I suspect row 4 is your culprit if all the rest are good.

 

[Carnious]

Check you have all of these set:

Disable driver & passenger seatbelt minder	IPC	720-01-01	xxxx xx6x xx--	xxxx xx0x xx--
Disables door ajar chime (0=12-hour time, 4=24-hour time	IPC	720-01-02	xx0x xx--	xx4x xx--
Disable key-in ignition chime	IPC	720-02-01	xxEx xxxx xx--	xx6x xxxx xx--
Disable Ignition / Start Engine Chime Seatbelt Not Latched using SWM = ECE	IPC	720-01-02	xxxx x0--	xxxx x2--

column 4 is before, column 5 is after. If you have a different "before" either look at what it should be or I can give you the new value if you give me the current one. I suspect row 4 is your culprit if all the rest are good.

Thank you! Here are my values. The two middle settings I don’t think I have right. But I’m not sure what to put. The door ajar and key in ignition ones.

 

[SilverPigeon]

@Carnious Kevin:

720-01-02

xx*x

xx--

Change from 2 to 0. Everything else looks correct.

 

[mapleleaf]

Hello @SilverPigeon i am trying to turn off all the chimes (key in ignition and door ajar) on my 2025 F150 Tremor. I already disabled seatbelt chime using manual method (unbuckle/buckle method). Can you please help me with the values I should update! Thank you.

 

[SilverPigeon]

@mapleleaf:

720-01-01

xxxx

xx*x

xx--

Change from 6 to 0,

720-01-02

xx*x

xx--

Change from 2 to 0,

720-02-01

xx*x

xxxx

xx--

Change from A to 2.

 

[Cobraman428]

Bed Cam Card timeout - After doing my updates in May, my bed cam card seems to timeout after 15-20 mins and I have to press the button on it to get it to come back online. Is there an option to change that timeout value higher? I usually have carplay in 2/3 of the screen and the flip cards in the other 1/3 of the 12" screen.

 

[dsaturday]

Hi everyone. I have a 2021 Job 1 3.5L PB. I bought it used and the dealer provided me with the yaw sensor and cable for pro trailer backup assist. The manual in the glovebox also includes 4 or 5 of the checkered stickers. I’d like to enable backup assist with the stickers. I believe I have the right changes made in FORScan based on Livinitups spreadsheet, but can’t say for sure.

Symptoms:

When I press the pro trailer backup button, nothing happens. No screen changes. No cameras. Nothing.

The button has power (its lights are on).

When I add a trailer from the sync screen, it asks me to set up the trailer (conventional, length/width/height/weight, etc). I complete that information and then it asks would you like to continue with backup assist setup? I click yes. It throws an error saying “Setup canceled. Measurements not saved.” However, I never actually enter any measurements.

After this, the yellow “on” button on the trailer button illuminates. But when you click the button, nothing happens.

All modules up to date in FDRS except body control module (I don’t have NASTF credentials to perform update).

Could anyone point me in the right direction for getting pro trailer backup assist to work with the stickers on my truck?

 

[SilverPigeon]

...I believe I have the right changes made in FORScan based on Livinitups spreadsheet, but can’t say for sure...

If the truck came with the pro trailer backup assist already, then, unless I'm mistaken, there should be no FORScan changes required. I'd suggest backing out of any FORScan changes you made and then trying to set up a trailer again.

 

[Highway 11]

I believe that line is for the Raptor only. For non Raptor you would use line 28 on the spreadsheet but it only works with the 12" digital cluster.

I have a 12" cluster and tried the Raptor Gauges edit last night. Unfortunately no success as the gauges remained the same. Not sure what else needs to be present to make that work.

 

[rugedraw]

If the truck came with the pro trailer backup assist already, then, unless I'm mistaken, there should be no FORScan changes required. I'd suggest backing out of any FORScan changes you made and then trying to set up a trailer again.

Some trucks (including my own) that were supposed to have it got misconfigured somehow. His truck was showing a 3 here (my truck also has a 3 here) and he changed it to a B, but is still won't work so something else is missing. I don't care about so I never tried to figure out what it takes to get it to work. Possibly other APIM changes and maybe changes to the IPMA, TRM, SCCM, PSCM, and ABS modules? Not sure, but I told him to post here as I'm sure someone has to have done this at some point.

@dantheman68 Did you ever get it working on your truck?

 

[dsaturday]

If the truck came with the pro trailer backup assist already, then, unless I'm mistaken, there should be no FORScan changes required. I'd suggest backing out of any FORScan changes you made and then trying to set up a trailer again.

My understanding is that the Job 1 trucks only had the option to do the yaw sensor. Ford promised to send out an update so the stickers would work, but my truck had a backlog of issues that was preventing it from receiving OTA updates until I did all updates manually using FDRS.

The trailer button did not work previously and still does not work. So I know it’s not any FORScan changes causing it not to work.

I was not even getting an option to set up pro trailer backup assist until I enabled using FORScan. On Livinitup’s spreadsheet, there is the following information for 7D0-01-03 node:

My truck was showing xxxx-xxxx-3xxx

On the spreadsheet, that corresponds to TM (trailer measurement) and a couple other things. There are four options for trailer measurement: no measurement (mine previously), measurements, sticker, and reserved. I changed that value to B (sticker) it is the first time I actually got the PTBA setup option to even appear. It just fails when I try to click it and says “Setup canceled, measurements not saved.”

Sponsored