2021+ F-150 FORScan List / Database / Spreadsheet

[SilverPigeon]

Welcome ?

Sponsored

 

[Wookz]

Might be a dumb question but I have a 2025 lariat PB 502a and I tried adding unreal theme but the number that was currently in that slot was the one requested but it's not unreal theme?

Could the 2025s have a different number code for that and if so do we have the new correct code?

Also seatbelt deactivate code is also not seemijg to work as well.

Thanks for the insight.

 

[antho]

Might be a dumb question but I have a 2025 lariat PB 502a and I tried adding unreal theme but the number that was currently in that slot was the one requested but it's not unreal theme?

Could the 2025s have a different number code for that and if so do we have the new correct code?

Also seatbelt deactivate code is also not seemijg to work as well.

Thanks for the insight.

It probably is unreal themes. Trucks are shipped with it now. Maybe you have a misunderstanding of real theme? @Wookz

 

[Wookz]

It probably is unreal themes. Trucks are shipped with it now. Maybe you have a misunderstanding of real theme? @Wookz

You know what i looked at my Brother in laws and mine who i put unreal theme on and then mine, it's the same thanks ?

But the seat belt shit is the last of my changes along with adding heated and cooled settings now. Appreciate it.

 

[antho]

You know what i looked at my Brother in laws and mine who i put unreal theme on and then mine, it's the same thanks ?

But the seat belt shit is the last of my changes along with adding heated and cooled settings now. Appreciate it.

What seatbelt shit? What coding are you using? are you talking about the seatbelt chime or the popup in the IPC? @Wookz

 

[Wookz]

What seatbelt shit? What coding are you using? are you talking about the seatbelt chime or the popup in the IPC? @Wookz

I figured it out in the apim menu, all good I missed and put the number in the wrong spot lol...

 

[tjarvis22]

Made a separate post but wanted to see if anyone had successfully used forscan to calibrate the gauge and DTE with the swap from 26 to 36 gal tank

 

[Aonarch]

Does anyone know if it is possible to add Rock Crawl drive mode to a non-FX4?

 

[Big Dog Daddy]

Does anyone know if it is possible to add Rock Crawl drive mode to a non-FX4?

Try here

Adding Hill Descent Control to a non-FX4 4WD | F150gen14 -- 2021+ Ford F-150, Tremor, Raptor Forum (14th Gen) | News, Owners, Community, Discussions

 

[SilverPigeon]

FIX FOR THE DRIVER ID MESSAGE AT KEY-ON
-------------------------------------
From @ENG430: "I compared the GWM values with 2021 Raptor fully updated like my Lariat.
It was in line:
716-27-01 xFxx xxxx xx
Changed F to "B" then rebooted GWM and it solved."

This fix has been confirmed to work on two trucks now.

 

[HammaMan]

FIX FOR THE DRIVER ID MESSAGE AT KEY-ON

what's that?

 

[SilverPigeon]

what's that?

Back a couple of pages: https://www.f150gen14.com/forum/thr...an-list-database-spreadsheet.1578/post-595718

 

[filasb]

Just did the manual FDRS update of all of my modules and now notice that I no longer have 360 camera at speed (only options are bed, hitch, and rear view). I also have the black box in my rear view, which I never had before.

Went into Forscan and confirmed that I had the correct values for camera at speed (didn't have to change anything) and also went ahead and removed the black box.

Has anyone else experienced this? I did a search of the forums but struck out.

 

[HammaMan]

Just did the manual FDRS update of all of my modules and now notice that I no longer have 360 camera at speed (only options are bed, hitch, and rear view). I also have the black box in my rear view, which I never had before.

Went into Forscan and confirmed that I had the correct values for camera at speed (didn't have to change anything) and also went ahead and removed the black box.

Has anyone else experienced this? I did a search of the forums but struck out.

re-run forscan clicking no to loading saved vehicle

 

[filasb]

re-run forscan clicking no to loading saved vehicle

@HammaMan, just did it and checked the values for Enable Cameras at Speed and they are still correct but still no 360 camera at speed.

Sponsored