2021+ F-150 FORScan List / Database / Spreadsheet

[Cobraman428]

I've been using the search function and reading pages of this thread and somehow am not finding it. Which characters did you change in these Forscan lines to get this to work?

Note: The last column was my AsBuilt setting before changing. I check Livnitup spreadsheet to make sure I had the correct changes for my truck for each one. RED lettering was AsBuilt, yellow highlighted was changes used for my 21 Platinum. My truck has all the required options for this. Hope this helps.

APIM	7D0-01-03	xxxx	xxFx	xxxx	724D-25E5-3FE3
ABS	760-03-01	xxxx	xxBx	xx	FBA0-06
IPMA	706-01-01	xxxx	xx5x	xxxx	8A50-A215-AE4E

Sponsored

 

[mario_jr]

Hello I'm new to the forum and was wondering if any of you changed the DRLs - allow fog lights? I made the change along with other tweaks which all worked except for this one. I wanted to see if anyone else had this problem.

My truck is a 2022 F150 KR
1FTFW1E51NFA90704

DRLs - allow fog lights

BCM

726-38-02

00xx

xxxx

xx--

allows fogs to be turned on with DRLs

 

[Buddy726]

Dose anyone know how to remove the climate temperature from the top of the touchscreen? I think it’s in the APIM 7do-02-02?

 

[DHBPhoto]

Hi there,

Anyone switched the "double press" on the tailgate back to single press? This drives me crazy.

Thanks.

 

[vidwiz]

Dose anyone know how to remove the climate temperature from the top of the touchscreen? I think it’s in the APIM 7do-02-02?

One way is to enable auto seat heat/cooling.

 

[Buddy726]

What line of code is that on? Because the one I listed before is the one to use.

 

[vidwiz]

What line of code is that on? Because the one I listed before is the one to use.

733-01-08

7D0-02-02

Temp display disappearing is a side effect of that mod.

 

[Buddy726]

The 733 or the 7d0 ?

 

[vidwiz]

both

 

[ROBB1]

Dose anyone know how to remove the climate temperature from the top of the touchscreen? I think it’s in the APIM 7do-02-02?

Disable status bar temp (SBT) in 7D0-02-02 *xxx xxxx xx—

 

[Buddy726]

I did it already. Thank anyway

 

[dolsen]

Disable status bar temp (SBT) in 7D0-02-02 *xxx xxxx xx—

Perfect, I needed this, I thought I did this last night but I removed the temp from popping up on the middle of the screen when changing

 

[Heydaveball]

Hey question for everyone. The laptop that had all my saved back to stock files on it crashed and i lot them all. Is there a way to put acouple of things back to stock? I installed tow mirriors last week and need to take it to the dealer to get them programmed and did know if that would affect the FDRS process. Thanks

 

[dolsen]

Disable status bar temp (SBT) in 7D0-02-02 *xxx xxxx xx—

Hmm, I have a 4 in that spot and a "4" in that spot disables all items associated with that bit... not sure what that means

 

[ROBB1]

Hmm, I have a 4 in that spot and a "4" in that spot disables all items associated with that bit... not sure what that means

Sorry I forgot this particular one is counter intuitive: set SBT to ”ON” to eliminate the temps at the top of the screen.

Sponsored