05/09/22 Build week

[Mcbutter]

My blend was 4/28 which was a Thursday. I didn't see modules till the following Tuesday for some reason.

It seems like every time we start to make some headway understanding how this process works we're proven to stop the logical thinking.

Sponsored

 

[TJE]

As long as we're trying to think logically...would it be safe to assume truck is not complete until the PCM modules show up?

 

[Mcbutter]

As long as we're trying to think logically...would it be safe to assume truck is not complete until the PCM modules show up?

After seeing each thread for each production week I'd say it's safe once the truck is in your driveway. Seems everyone has a different experience from chip holds, plant holds, shipping, it's nuts.

 

[TJE]

After seeing each thread for each production week I'd say it's safe once the truck is in your driveway. Seems everyone has a different experience from chip holds, plant holds, shipping, it's nuts.

Hahaha I think you're probably correct!

 

[JacobGW05]

I’m curious if Im on an actual part hold up not chip hold. I’ve seen a lot of talk about wiper motors on the threads but I can’t make any sense to this madness

 

[Riderdie757]

My positivity (or stupidity) is going to buy me one more day of optimism. Then it's the weekend so I may tack on another 48 to 72 hours (yes I know they run on weekends).

My official build date isn't until tomorrow "so your saying there's a chance"!

 

[JacobGW05]

My positivity (or stupidity) is going to buy me one more day of optimism. Then it's the weekend so I may tack on another 48 to 72 hours (yes I know they run on weekends).

My official build date isn't until tomorrow "so your saying there's a chance"!

The hardest part about the process is you try to convince yourself that it won’t happen to you like anything in life! ?? fingers crossed it goes smoothly ??

 

[tgreid]

Hi guys - long time lurker, first post. Have a Tremor 402a on order.

Order date: 12/20/2021 (from Granger)
VIN date: 4/14/22
Window Sticker date: 5/3/22
Build week: 5/2/22 Pushed to 5/9/22
Blend date: 5/9/22
Modules populated and "Activate" button working in Ford app: 5/10/22

Still "In Production" today, so I contacted Ford chat and they stated that it is on chip hold with an estimated completion date of 5/26 - 6/1. More likely I've been hit by the wiper issue, my sequence number (550) is close to Payup.

The intel on this forum is amazing, but I'm pulling my hair out at this point...

 

[Bannerman]

Hi guys - long time lurker, first post. Have a Tremor 402a on order.

Order date: 12/20/2021 (from Granger)
VIN date: 4/14/22
Window Sticker date: 5/3/22
Build week: 5/2/22 Pushed to 5/9/22
Blend date: 5/9/22
Modules populated and "Activate" button working in Ford app: 5/10/22

Still "In Production" today, so I contacted Ford chat and they stated that it is on chip hold with an estimated completion date of 5/26 - 6/1. More likely I've been hit by the wiper issue, my sequence number (550) is close to Payup.

The intel on this forum is amazing, but I'm pulling my hair out at this point...

My 402A was ordered from Granger the day after yours. If you are ever looking for Tremor-specific info: https://www.f150tremor.com/

 

[Riderdie757]

To add to the world of what we know and have no clue of what the hell is going on.

I deleted the vehicle from Ford Pass app, then reentered the vin.

 

[Payup]

Hi guys - long time lurker, first post. Have a Tremor 402a on order.

Order date: 12/20/2021 (from Granger)
VIN date: 4/14/22
Window Sticker date: 5/3/22
Build week: 5/2/22 Pushed to 5/9/22
Blend date: 5/9/22
Modules populated and "Activate" button working in Ford app: 5/10/22

Still "In Production" today, so I contacted Ford chat and they stated that it is on chip hold with an estimated completion date of 5/26 - 6/1. More likely I've been hit by the wiper issue, my sequence number (550) is close to Payup.

The intel on this forum is amazing, but I'm pulling my hair out at this point...

we got screwed @tgreid

 

[Payup]

To add to the world of what we know and have no clue of what the hell is going on.

I deleted the vehicle from Ford Pass app, then reentered the vin.

20 people currently scrambling to do this... ?

 

[JohnMcClane]

I won't even bother until I get modules. Which, based on the way things look. Monday at the earliest for me.

 

[tgreid]

My 402A was ordered from Granger the day after yours. If you are ever looking for Tremor-specific info: https://www.f150tremor.com/

Thanks Bannerman, I've been following your posts all over the web and FB for a while. We've basically been in the same boat until build week, but maybe I'll see you in Des Moines now

 

[Nailgunn]

To add to the world of what we know and have no clue of what the hell is going on.

I deleted the vehicle from Ford Pass app, then reentered the vin.

Order date April 12, 2022
Blend date May 10, 2022

I can second this happening. Mine was giving an error message for activation but now it tells me I can't activate until I receive delivery of the vehicle.

Modules showed up yesterday but I'm still "In Production".

Sponsored