What did you do TO your F-150 today? 🙋🏻‍♂️

[Cobraman428]

Just got the Melipron Laptop Stand put together for my PB. Have to wait a few days before installing it (Some assembly required). I'll provide an update next week.

https://bit.ly/3JXTWZ1

Sponsored

 

[jkosh22]

I did something. Still messing with the headlight sensors that just don't want to adjust but getting things figured out on the PowerBoost.

The bronze fuel rebels are probably my all time favorite wheel. Truck looks great high and low.

 

[Bugzuki]

The bronze fuel rebels are probably my all time favorite wheel. Truck looks great high and low.

Thanks. Part of the issue with the lowering has been the wheel since they have negative offset so they rubbed a lot. But I like them so I figured out how to make it work.they only rub a little at full steering lock now.305x50R20 Proxy Tires.

But I also had to modify the stock rear bumpstops to keep the driveshaft from hitting the EV battery box.

 

[jkosh22]

Thanks. Part of the issue with the lowering has been the wheel since they have negative offset so they rubbed a lot. But I like them so I figured out how to make it work.they only rub a little at full steering lock now.305x50R20 Proxy Tires.

But I also had to modify the stock rear bumpstops to keep the driveshaft from hitting the EV battery box.

At least you found a way to make it work.

Seems like it’s always something whether you lift it or lower it seems!

 

[National Superbike]

Raptor steering wheel installed. I switched out my XLT bezel and buttons. My truck isn't wired for heat? Whatever the extra black plug is to the clock spring.

I honestly don't think it's worth it. My XLT wheel was very nice.

I have a STX with the rubber wheel and I'm definitely going to swap it out. It just feels like junk. But, yeah, I think any of the other wheels are just appearance differences.

 

[Williamoz]

New Cap

 

[VRFlyer]

The only problem is that now you need an XB3 Morimoto smoked third brake light

Yup, cause it's sticking out like a sore thumb!

 

[Ricksc]

The only problem is that now you need an XB3 Morimoto smoked third brake light

Third brake light installed

 

[moritzes]

Third brake light installed

LOL. Nice!! Looks great.

 

[sbi]

Gave her new shoes.

 

[Riddick]

Much needed detail and added OEM splash guards.

 

[VRFlyer]

Third brake light installed

I painted those torx screws flat matte black.

 

[Old Hat]

Picked up a matching set of take off wheels for my soon to arrive Bridgestone Blizzaks. They were pulled off the first week after delivery and are like brand spanking new. Merry Christmas!

 

[VRFlyer]

Installed a NOCO Genius 2D as suggested by a few others' posts. I didn't tidy up the cable leads since the cold weather wouldn't let them flex very much, but they're def. not going (sag) anywhere either.

 

[oncechance]

Gave her new shoes.

Man.....those are sexy.

Sponsored