Anyone added back the removed CHMSL camera - AKA bed camera?

[bhamilton]

I am interested if you have the camera for sale?

Sent you a DM

Sponsored

 

[jeffzeno]

Sent you a DM

 

[jeffzeno]

I saw it and responded to it now I can't find it?

 

[johnnySV]

Im confused. Between the 12-pin (grey) w/ 8 wires, isnt there a jumper harness to go to a 6-pin (black) w/ 5 wires for the camera? Is this jumper harness in there already or do we need to source it? If needed, how can we source it ??

 

[5.XOH]

Before making any forscan changes, should the lights still work when plugging in?

 

[cpw]

Before making any forscan changes, should the lights still work when plugging in?

I was able to check out the lights with the trailer light check tool from my phone before forscan changes.

 

[5.XOH]

I was able to check out the lights with the trailer light check tool from my phone before forscan changes.

Looks like I may have purchased a F-250 third brake instead. FB listing was marked wrong.

 

[Pat Richard]

Before making any forscan changes, should the lights still work when plugging in?

Yes - nothing changes for the lights. Forscan just enables the camera.

 

[5.XOH]

Is the IPMA Lin calibration absolutely necessary?? I made the APIM and IPMA changes and got the camera working as intended.

What does the calibration do?

 

[Weller12]

Does anyone know if the FORscan changes on the first page are the same for a 2025? I know some changes differ. I have a camera and harness i just need to run the wires to the modules (I am not that intimidated as long as i can get the correct pins ordered)

Sponsored