2021+ F-150 FORScan List / Database / Spreadsheet

[Kanuck]

I find my heated seats and rear defrost only come on when the outside temp is around 50 F or below. Above that and they don't turn on with remote starting.

Sponsored

 

[Munch]

Has anyone come up with the code or a way to de-activate the tailgate open button on the fob?

Thanks!

 

[Porpoise Hork]

Has anyone come up with the code or a way to de-activate the tailgate open button on the fob?

Thanks!

Try this one

https://www.f150gen14.com/forum/threads/tailgate-fob-disable.9513/#post-187095

 

[Munch]

Try this one

https://www.f150gen14.com/forum/threads/tailgate-fob-disable.9513/#post-187095

THANK YOU!!!!

 

[Porpoise Hork]

Sure thing. I'd do this on mine if I didn't keep a tonneau cover on the bed. It does a really good job at keeping the tailgate closed on keyfob mis-clicks.

 

[XLT22]

Think I’ve nuked my remote start by enabling spot lights on my tow mirrors. There’s a persistent DTC in the PDM for an open circuit relating to the switch which I don’t have since I’m running the spot lights through the APIM. Of course the 25 doesn’t have a a dummy plug for the spot light switch like the 21-23.

 

[67RS427]

I have a a 25 tremor and looking to add Walk away lock. I have one question- so first I have to add 8 to enable walk away lock and to add audible feedback the next step is to change that 8 to C? Is that correct?

APIM

7D0-09-05

xxxx

8xxx

xx--

APIM

7D0-09-05

xxxx

Cxxx

xx--

Did you manage to get the walk away lock feature working? I tried it on my '25 Tremor and had no luck. I don't want the horn sounding, just the lock feature that I'm used to from my last two GMC trucks.

 

[67RS427]

2024 APIM:

7D0-01-04

xxxx

x*xx

xx--

RCOD View at Speed (RCODVS) • Hitch View at Speed (HVS) • 1 Pedal Drive (PD) • Off road Views at Speed (OVS)

Set to D.
2024 IPMA:

706-02-02

xxxx

x*xx

xx--

FeatureCfg_DPAC_OffsetOverlay (FCDPACOO) • FeatureCfg_DPAC_OffRoadOverlay (FCDPACORO) • FeatureCfg_DPAC_ViewCtlAtSpeed (FCDPACVCAS) • FeatureCfg_DPAC_OffRoadCameraMenu (FCDPACORCM)

Set to E
Also 2024 IPMA:

706-02-02

xxxx

xxx*

xx--

FeatureCfg_DPAC_OffRoadVersion (FCDPACORV)

Set to 3.
These are all the same as 2023. There were never any other front views at speed apart from off-road view at speed. The capability is there.

Any idea if this is the same for the 2025? I'm trying to get the camera working at speed on my '25 Tremor and tried lines 5-7 from the spreadsheet with no luck. Thanks!

Enable Cameras at Speed	706-02-02	xxxF	CExx	xx--
APIM	7D0-01-01	xxxx	xxxx	FD--
APIM	7D0-01-04	xxxx	FDxx	xx--

 

[mapleleaf]

Did you manage to get the walk away lock feature working? I tried it on my '25 Tremor and had no luck. I don't want the horn sounding, just the lock feature that I'm used to from my last two GMC trucks.

Yes it works. APIM shows both option lock and sound. I also toggled OFF honk when lock.

 

[67RS427]

Yes it works. APIM shows both option lock and sound. I also toggled OFF honk when lock.

Maybe that's where I messed up... Are you saying those changes simply add the toggle in the settings menu? I didn't even look for it after I made the change, but also had an update pushed that night that I think rolled back some changes I made.

 

[SilverPigeon]

Any idea if this is the same for the 2025? I'm trying to get the camera working at speed on my '25 Tremor and tried lines 5-7 from the spreadsheet with no luck. Thanks!

Enable Cameras at Speed	706-02-02	xxxF	CExx	xx--
APIM	7D0-01-01	xxxx	xxxx	FD--
APIM	7D0-01-04	xxxx	FDxx	xx--

What do you have here?:

				FeatureCfg_DPAC_OffRoadVersion (FCDPACORV)
706-02-02	xxxx	xxx*	xx--	0 =	FCDPACORV INACTIVE		3 =	FCDPACORV U725
				1 =	FCDPACORV Raptor		4 =	FCDPACORV Reserved
2 =	FCDPACORV CX430		5 =	FCDPACORV CALFILE_BASED

A normal f-150 should be set to 3. A Raptor is set to 1. 2 is for bronco sport. I don't know if there's a specific tremor setting, but I doubt it; it should probably be 3.

The same values apply from 2021 through 2025. Also try rebooting the IPMA and APIM modules in FORScan service procedures, clear and rescan DTCs.

 

[mapleleaf]

Maybe that's where I messed up... Are you saying those changes simply add the toggle in the settings menu? I didn't even look for it after I made the change, but also had an update pushed that night that I think rolled back some changes I made.

Correct, you should see these options in Vehicle settings> Locks

 

[mapleleaf]

What do you have here?:

				FeatureCfg_DPAC_OffRoadVersion (FCDPACORV)
706-02-02	xxxx	xxx*	xx--	0 =	FCDPACORV INACTIVE		3 =	FCDPACORV U725
				1 =	FCDPACORV Raptor		4 =	FCDPACORV Reserved
2 =	FCDPACORV CX430		5 =	FCDPACORV CALFILE_BASED

A normal f-150 should be set to 3. A Raptor is set to 1. 2 is for bronco sport. I don't know if there's a specific tremor setting, but I doubt it; it should probably be 3.

The same values apply from 2021 through 2025. Also try rebooting the IPMA and APIM modules in FORScan service procedures, clear and rescan DTCs.

does this allow front camera to work all the time while driving?

my rear camera stays ON while in drive mode (I was also able to remove the black box) but my front camera turns OFF when my speed is high.

 

[67RS427]

What do you have here?:

				FeatureCfg_DPAC_OffRoadVersion (FCDPACORV)
706-02-02	xxxx	xxx*	xx--	0 =	FCDPACORV INACTIVE		3 =	FCDPACORV U725
				1 =	FCDPACORV Raptor		4 =	FCDPACORV Reserved
2 =	FCDPACORV CX430		5 =	FCDPACORV CALFILE_BASED

A normal f-150 should be set to 3. A Raptor is set to 1. 2 is for bronco sport. I don't know if there's a specific tremor setting, but I doubt it; it should probably be 3.

The same values apply from 2021 through 2025. Also try rebooting the IPMA and APIM modules in FORScan service procedures, clear and rescan DTCs.

I do have a 3 there.

Correct, you should see these options in Vehicle settings> Locks

Interesting... I do have that in my settings, and it is turned on, however, it does not auto lock when I walk away. Not sure why

 

[mapleleaf]

I do have a 3 there.

Interesting... I do have that in my settings, and it is turned on, however, it does not auto lock when I walk away. Not sure why

I followed these steps when I enabled them

Sponsored