2021+ F-150 FORScan List / Database / Spreadsheet

[Big Dog Daddy]

You need to convert decimal to hexadecimal,

https://www.rapidtables.com/convert/number/decimal-to-hex.html

Sponsored

 

[SilverPigeon]

Ok, ok… thank you! Your previous post is what made me start trying to decipher all of this. Am I correct in assuming after 1E that FD is next? Or does first digit stay a numeral? I’m assuming 0 is 10 and not actual zero? Or is zero actually zero and it goes from 9 to A? I’m probably making a mountain out of a mole hill…. The hamsters are working overtime. Again, appreciate everyone

So it's just a lesson in hex?. Base 16, numbers 0-9, A-F. A= 10 decimal, B = 11 etc.

So, if the whole number was 0A7E, then subtracting 16 decimal makes it 0A6E

You will find that you probably will not need to go lower than 0Axx before the PCM gets back to its hard-coded limit, I just don't know what that limit is.

EDIT: I should also say, if by chance you had to go lower than 0A0E for example, it's just subtraction again as A (hex) - 1 (in both hex and decimal) = 9; therefore:

 

[Big Dog Daddy]

@SilverPigeon it's Monday 9:30 pm here on the US east coast, what time is it where you are?

 

[SilverPigeon]

12:44 in the future (Tuesday) ??

 

[Jackpine_Savage]

So it's just a lesson in hex?. Base 16, numbers 0-9, A-F. A= 10 decimal, B = 11 etc.

So, if the whole number was 0A7E, then subtracting 16 decimal makes it 0A6E

You will find that you probably will not need to go lower than 0Axx before the PCM gets back to its hard-coded limit, I just don't know what that limit is.

I was getting the base 16 but I was confused by being broken into 2 areas for my year. After plugging in my value into the converter big dog daddy supplied I was able to see it better and see the “E” spot is “ones” and if I did need less then 0A then 09xx would be next. I’ll let it soak in at work tomorrow then come home and play with it. I can’t thank you all enough for the patience. Minor to you, huge to me.

 

[SilverPigeon]

...I can’t thank you all enough for the patience. Minor to you, huge to me.

You're welcome Mike. You might also find what I wrote here useful for your future FORScan-ing: https://www.f150gen14.com/forum/threads/a-primer-for-advanced-forscan-editing.27460/

 

[Jackpine_Savage]

Just wanted to follow up and give thanks again for the help from everyone. On my 2025 F-150 Tremor with 305/70R18 KO3’s I landed at a value of OA69. Spot on at 55-60mph , .2 or so over at 80mph, and .2 under at 35mph. I’ll quit while I’m ahead. I also appreciate the resource links! Now to figure out bluecruise. Not that I’ll use it much but it’s a brand new ride and should work. I did notice while logging miles yesterday on cruise to bump off gps that it would say lane centering not available. Lane assist is though. Starting to think it has something to do with lift and cameras.

 

[LakeRun21]

I've started adding FORScan spreadsheets here for anyone interested: https://bit.ly/3cJnYMS

My FORScan tutorial is here: https://docs.google.com/document/d/1-8dKaS_Spu4Zw4hV_CrKC4tLoP9G8yejqegF1wxIqxY/edit

For the "disable active air dam" I see you have:

7E0-162-02

xxxx

xxxx

x1--

In another thread, I saw someone post:
7E0-162-02 XXXX XXXX 01XX

Is this the same?

Also, have you successfully implemented your parameters?


Thanks for your help!

 

[antho]

For the "disable active air dam" I see you have:

7E0-162-02

xxxx

xxxx

x1--

In another thread, I saw someone post:
730-162-02 XXXX XXXX 01XX

Is this the same?

Also, have you successfully implemented your parameters?


Thanks for your help!

I would go with the one that @Livnitup posted. Why even bother with what someone in a thread posted? That module would be the Power Steering module and doesn't even have that value available. @LakeRun21

 

[LakeRun21]

I would go with the one that @Livnitup posted. Why even bother with what someone in a thread posted? That module would be the Power Steering module and doesn't even have that value available. @LakeRun21

@antho apologies, was a typo. Both are 7E0- Based on the additional note on the sheet, regarding “ignore all but altered value”, I assume the result will be the same.

 

[Livnitup]

For the "disable active air dam" I see you have:

7E0-162-02

xxxx

xxxx

x1--

In another thread, I saw someone post:
7E0-162-02 XXXX XXXX 01XX

Is this the same?

Also, have you successfully implemented your parameters?


Thanks for your help!

Both mine and the other thread have the same value; you ignore whatever you have where the x's are and just put the 1 where indicated

 

[LakeRun21]

Both mine and the other thread have the same value; you ignore whatever you have where the x's are and just put the 1 where indicated

@Livnitup thanks for the quick reply! I saw your comment at the top of the sheet and made the change. Can say it worked! Greatly appreciate you managing this repository of information.

 

[Gibbsbuller]

Having trouble with global open. Global open will only work on passenger side. Global close will work on drive and passenger. Any tips? I've checked and rechecked the values in the spreadsheet to verify that I've modified correctly. 2021 f150

 

[SilverPigeon]

Try rebooting the DDM and BCM in service procedures. Failing that, can you put here what you have for:

DDM	740-06-02
DDM	740-06-03

And

BCM	726-11-02
BCM	726-22-01
BCM	726-22-02

It doesn't hurt to have another set of eyes ?

 

[ongrade]

Has anyone else not been able to change the splash screen from the 75th anniversary to anything else? Any change I make results in this screen.

I know the APIM sometimes takes a few starts to change, but I don’t believe that’s the case her. When I change it back to the 75th anniversary screen it happens immediately after the change. This is on a 23 Lariat, did Ford do something to lock in the 75th anniversary in that year.

Sponsored