1.5 or 2” level stock size tires

[tylerdzugan]

Hi everyone, I just got my new to me 2022 xlt. I wanted to stick with stock size AT so I picked up some cooper rugged trek in a 275/60/20 sl.
Is anyone running a 1.5 or 2 inch level with a stock size AT?
TIA

Sponsored

 

[Je1279]

I have a 2" level with 34" tires but I think a 2" level with your setup would look fine.

 

[tylerdzugan]

I have a 2" level with 34" tires but I think a 2" level with your setup would look fine.

my fear is it looking a little too tall.

 

[Je1279]

Understood. Hopefully, someone has a similar setup do you can see what it looks like.

 

[tylerdzugan]

Understood. Hopefully, someone has a similar setup do you can see what it looks like.

Did a little test and used the jack to raise the hub center to fender measurement 2” do you think the tires still fill it out enough? They measure closed to a 285/60 than a 275/60.

 

[Je1279]

Good thinking using the jack! It looks good to me, but your opinion is what matters the most. Here is mine with 34's if it helps.

 

[tylerdzugan]

Good thinking using the jack! It looks good to me, but your opinion is what matters the most. Here is mine with 34's if it helps.

What wheels are those ,they look fantastic. I am assuming 2" level?

 

[Je1279]

What wheels are those ,they look fantastic. I am assuming 2" level?

Thanks! Yes, Ford Performance suspension set to +2" in front. Wheels are VenomRex VR-601's in carbon graphite (20x9 with +12mm offset).

 

[tylerdzugan]

Ill keep that in mind, great looking ride!

 

[HammaMan]

Missed an opportunity to grab 285/60 (33.5") or 275/65 (34.1") when getting tires. In person and not focusing on select 'beauty' angles, the stock size just isn't there nor is leaving the ass in the air. 2" level + 34s is the best combo IMO. No mileage hit so long as there's no mexi style wheel stick out. Nothing kills usable MPG faster than poor aero choices.

 

[FaaWrenchBndr]

Did a little test and used the jack to raise the hub center to fender measurement 2” do you think the tires still fill it out enough? They measure closed to a 285/60 than a 275/60.

I think that looks perfect

 

[5IVE 0HH]

Hi everyone, I just got my new to me 2022 xlt. I wanted to stick with stock size AT so I picked up some cooper rugged trek in a 275/60/20 sl.
Is anyone running a 1.5 or 2 inch level with a stock size AT?
TIA

I just got a 2” level. Here’s what it looks like on stock tires before I upgrade to 34s

 

[tylerdzugan]

I just got a 2” level. Here’s what it looks like on stock tires before I upgrade to 34s

Thank you, was this a motofab one? I think I may just go with 1.5 to retain some of the rake.

 

[5IVE 0HH]

It’s a Readylift. Hard to tell, but it technically still has ~1” rake

 

[tylerdzugan]

It’s a Readylift. Hard to tell, but it technically still has ~1” rake

thanks, I think moto fab sits .25" higher than most so I am gonna go with the 1.5 and it should put me right inbetween 1.5 and 2" level.

Sponsored