2021+ F-150 FORScan List / Database / Spreadsheet

[nitrobass24]

You can make your tire size smaller in forscan to trick your speedometer into thinking you are going slower than you actually are.

Sponsored

 

[roadPilot]

You can make your tire size smaller in forscan to trick your speedometer into thinking you are going slower than you actually are.

?

 

[FI300]

Is it possible to turn off the cylinder deactivation on the 24s? Went searching through the spreadsheets but didn't see it. I know I can run around in sport to avoid it but that can be annoying at times as well.

No its not. It requires an after market tune which i don't believe are available yet for the 24.

 

[OleSasquatch]

Waiting on my OBD link to get here Saturday and am interested in 2 settings if anyone can tell me if FORScan can do it or not and where?

1- I like to see the transmission gear display to see what gear I'm in, I keep having to turn it on everytime. Is there a way to keep it on always?

2- The radio stays on for about 2-4 seconds after I open the door, I'd like the radio to shut off as soon as the door is opened. That way I'm not blasting people for those 2-4 seconds for the radio to go off.

Truck is a 2024 F150 STX 4x4 2.7.

 

[SilverPigeon]

@VRFlyer , re your DRLs, did you want them permanently disabled or switchable within Sync > Settings > Vehicle > Lighting?

 

[VRFlyer]

@VRFlyer , re your DRLs, did you want them permanently disabled or switchable within Sync > Settings > Vehicle > Lighting?

I’ve gone through those settings, but that menu doesn’t even exist for DRL. It’s a Canadian thing for this truck. Trust me.

 

[SilverPigeon]

I’ve gone through those settings, but that menu doesn’t even exist for DRL. Trust me.

The entire Lighting menu? Or just the DRL switch?
What do you have for this in FORScan?:
APIM

7D0-09-01

xxxx

x*xx

xx--

 

[VRFlyer]

The entire Lighting menu? Or just the DRL switch?
What do you have for this in FORScan?:
APIM

7D0-09-01

xxxx

x*xx

xx--

I have yet to do the FORScan dealio, I will investigate that during this week for you. I’m new to this software, just installed it the other day or so. But, I’m pretty confident and comfortable with anything that comes with digital anything.

 

[rugedraw]

1- I like to see the transmission gear display to see what gear I'm in, I keep having to turn it on everytime. Is there a way to keep it on always?

Your truck being a 2024 has a different IPC set up that what we have seen here, but in the spreadsheet, there is a breakdown for the 2024 IPC settings. I would check these sections:

You'd have to play with it to see if it turns it on. Just document whatever is there before you change it so you can go revert back if needed.

 

[superfordman]

Finally did my Big Tires 325 60 20 in FORScan yesterday and the circumstances I put in was pretty dang close. Went from 6 MPH off down to 1-2 mph. I might still play with that later a bit to get dead on.

Here is my problem though. I’m getting a DTC error and when I reset the module & cycle on and off and restart everything it’s still there. I’ve tried lowering the circumference and that does not work. When I put back to stock then it clears the error. Any suggestions?

here is the error code U0422 invalid data received from body control module.

thank you guys!!! And Merry Christmas ? to you all.

You need to run the PCM/TCM relearn procedure once you change the value.

 

[OleSasquatch]

Your truck being a 2024 has a different IPC set up that what we have seen here, but in the spreadsheet, there is a breakdown for the 2024 IPC settings. I would check these sections:

You'd have to play with it to see if it turns it on. Just document whatever is there before you change it so you can go revert back if needed.

I've been eyeballing that setting, guess I'll just have to do some trial and error.

I made 7 other FORScan changes just today.

 

[rugedraw]

I've been eyeballing that setting, guess I'll just have to do some trial and error.

I made 7 other FORScan changes just today.

 

[Jimmy Young]

You need to run the PCM/TCM relearn procedure once you change the value.

ok thank you superfordman?
I’ll try this tomorrow.

 

[Joekr5]

Hi folks!

I see in the latest version of Livinitup's spreadsheet that the ACM tab now only includes 21-23 MY trucks and there's no 24 tab shown. Did the ACM get rolled into a different module?

Sponsored