Request VIN Lookup Thread

[rugedraw]

Can someone run mine before I pay for another FDRS license? I would to see if I can turn on the side mirror cams with blinkers while towing, I know the APIM needs to be somewhat up to date to do this.

1FTFW1E8XNFCO6251

Thank you in advanced.

You're on the latest Sync version so no issues there. You would need to update the IPMA to get it to work, though.

Sponsored

 

[mdomicolo]

You're on the latest Sync version so no issues there. You would need to update the IPMA to get it to work, though.

Dang, I guess i should buy a license and do it.. lol. Thank you so much though- much appreciated.

 

[aviatetheway]

Could you please check my vehicle for updates? Purchased in March as so far I have not received any updates.

VIN: 1FTFW1RG3RFA73341

 

[91TTZ]

Hey everyone, just purchased a 2022 Tremor 402a two weeks ago. Not really sure what updates are on the truck. Like a poster above. I was wanting to set up the trailer side cameras. Was wondering if my IPMA was up to date along with sync. If the IPMA is not is this an update that will occur OTA or something I have to do on my own. Appreciate the help. Thanks

Vin 1FTEW1E80NFA60082

 

[rugedraw]

Could you please check my vehicle for updates? Purchased in March as so far I have not received any updates.

VIN: 1FTFW1RG3RFA73341

Yours being a 2024 was built with most of the updates already. You do show a few pending, and I'm sure they'll come in eventually. Your modem is working and talking to the server.

Hey everyone, just purchased a 2022 Tremor 402a two weeks ago. Not really sure what updates are on the truck. Like a poster above. I was wanting to set up the trailer side cameras. Was wondering if my IPMA was up to date along with sync. If the IPMA is not is this an update that will occur OTA or something I have to do on my own. Appreciate the help. Thanks

Vin 1FTEW1E80NFA60082

Your truck is on the latest Sync version and the modules pending updates are below. Unfortunately, you will not be able to activate the turn signal cameras. For whatever reason, Ford is not releasing the IPMA update for Tremors and Raptors. As you can see, there is no pending IPMA update for you.

 

[aviatetheway]

Yours being a 2024 was built with most of the updates already. You do show a few pending, and I'm sure they'll come in eventually. Your modem is working and talking to the server.

Thank you!

 

[91TTZ]

Your truck is on the latest Sync version and the modules pending updates are below. Unfortunately, you will not be able to activate the turn signal cameras. For whatever reason, Ford is not releasing the IPMA update for Tremors and Raptors. As you can see, there is no pending IPMA update for you.

Thanks, I appreciate the help. So no way to side load it, just not available for the tremor or raptor for 2021-22. The ones that say update available with the green dot are OTA correct? Nothing special I need to do?

 

[rugedraw]

Thanks, I appreciate the help. So no way to side load it, just not available for the tremor or raptor for 2021-22. The ones that say update available with the green dot are OTA correct? Nothing special I need to do?

I do know that IPMA software can be side-loaded with FORScan. I do not know how to do it nor do I have the files needed to do it. What I don't know is if it can be side-loaded onto a Tremor/Raptor. Based on my understanding of how these things work, I am inclined to say it can be side-loaded onto your truck if you have the knowledge and resources to do it, but that goes beyond the scope of what I can help you with.

 

[91TTZ]

I do know that IPMA software can be side-loaded with FORScan. I do not know how to do it nor do I have the files needed to do it. What I don't know is if it can be side-loaded onto a Tremor/Raptor. Based on my understanding of how these things work, I am inclined to say it can be side-loaded onto your truck if you have the knowledge and resources to do it, but that goes beyond the scope of what I can help you with.

Thanks, will do my research. Again appreciate the help. Have a nice day.

 

[cass006]

could someone look mine up. 2021 active package. I took to truck into dealer and had updates but blue cruise still not working.
1FTFW1ED5MFB93131
Thanks,
Sean

 

[rugedraw]

could someone look mine up. 2021 active package. I took to truck into dealer and had updates but blue cruise still not working.
1FTFW1ED5MFB93131
Thanks,
Sean

I am not sure where to start with your case. Yes, the dealer did some of the updates related to Bluecruise, but your Sync software is at 20301 which is old software from 2020 known to cause issues with not being able to update certain modules that are also needed for BC to function.

Attached is the latest outline that shows how to perform the 21G01 campaign to activate Bluecruise. Refer to page 6 and you will see this:

They will need to update the APIM several times on your truck before BC will work. Due to the bad software it is sitting on, they have to replace the APIM entirely to get this fixed. The 21G01 campaign expires 12/31/24, so you still have time to get it in there.

Edit: Your SCCM and IPC also need to be updated before BC will work.

 

[b-rad78]

Vin check please
1FTFW1E84PFC39877

 

[rugedraw]

Vin check please
1FTFW1E84PFC39877

Truck is on Sync 23045 which is two versions behind the latest. OTA 6.1.0 was sent to it a few weeks ago, but it seems the truck was not started to accept the OTA so it timed out. Modules pending updates are below:

 

[b-rad78]

Thank you.

 

[gdflynn1]

@rugedraw : I decided to upgrade to a '24
Love it so far. Can u tell me how current/far behind I am on OTA? As usual, thank you!

1FTFW1RG9RFB08139

Sponsored