2021+ F-150 FORScan List / Database / Spreadsheet

[superfordman]

After hours of comparing another KR with ACC and SSR, I can't find a setting for it ?‍. I give up ?

EDIT: Dog with a bone here ?
@superfordman Troy, I happened upon your spreadsheet to do with IACC and SSR and I have a question:

I've obviously chopped the bits in question from your sheet (forgive me?) and I'm wondering why ISA is disabled in the APIM but enabled in the IPC? Is it because PSA is enabled and they might be mutually exclusive?

I currently have APIM ISA disabled but also APIM PSA disabled, so I wanted to see if there was anything I need to worry about before changing these things?

ISA is just the speed limit warning, so nothing major there, I leave it disabled. PSA is the newer predictive TSR so that is worth it and should enable that.

Sponsored

 

[superfordman]

Not the person who originally asked, but I have a 501A and my truck has Adaptive Cruise and Speed Sign Recognition.

It's possible it isn't standard and came with an additional option, not sure.

YES, My truck lariat 501A, but I have Adaptive Cruise and Lane Centering

Gotcha, good to know. I probably did know that at one point in time but been a while plus they change everything so much year by year hard to keep up anymore. Most the 501As I run across are all less adaptive cruise and only seen mainly in the 502A, unless they came with 360 cams or trailer backups assist, which I'm just starting to remember again now...

 

[SilverPigeon]

ISA is just the speed limit warning, so nothing major there, I leave it disabled. PSA is the newer predictive TSR so that is worth it and should enable that.

Thanks Troy ?. I'll give it a go tomorrow, unless @Drevnr you get to give it a go before me ?

 

[Drevnr]

Thanks Troy ?. I'll give it a go tomorrow, unless @Drevnr you get to give it a go before me ?

sir, I'll let you go ahead this time. , ?.

 

[SilverPigeon]

Ok, so enabling PSA had no effect. Looking at its info icon, it talks of slowing in corners etc. This must mean it works with Nav and bluecruise is possibly needed as well.

I then tried ISA anyway. I changed 7D0-09-01 xxxx-xxxx-xA-- to 7D0-09-01 xxxx-xxxx-xB--; this came up as a different setting in the APIM, under speed limit assist and below speed limit warning, called Intelligent Speed Limiter. It's info icon talks of setting max speed based upon speed sign recognition and tolerance; It defaulted to off. When attempting to turn it on, it replied that it was not available at this time.

@Drevnr , @superfordman , I'll keep looking as (for me) an academic exercise ?‍

 

[sharper4]

My 501a has lane centering and adaptive cruise. It does automatically adjust the speed limit (which I promptly shut off b/c it sometimes reads the frontage road when you're on the highway, or the highway speed when you're on the frontage road).

 

[waders41]

Hi all. Im pretty new here so pardon my ignorance but I have read many pages of this thread and a few other threads and I am still a bit confused about one thing.

One the spreadsheet, obviously the common list is easy to find and read, but are there other functions that can be done in Forscan that are not on the Common tab? Is there a list of all possible things somewhere?

A few things Im looking for that I didnt see there:
- Turn off lane centering "put your hands on the wheel" nanny or make it more forgiving?
- Add bed camera (and possibly other cameras) to the center screen stack?
- Choose the default drive mode - Always start on eco
- Change the default background color on the digital gauge cluster (make it look like its in Normal when its in Eco, etc)

Thank you all

 

[Bob Violence]

- Choose the default drive mode - Always start on eco

This is 1000% not do-able.

Everyone on here has wished/hoped/prayed for this, but no luck to date.

 

[Parthery]

Lane centering is turned on and off by a button on the steering wheel. It remembers the last setting.

 

[NewFordGuy24]

So I am getting the hang of this FORScan thing and loving it. Now I'm running into seemingly basic issues. For example, when I try to do the global windows up I have gone through each block twice and double checked and also added/enabled the option in sync 4 but I can't get the windows to roll back up. Am I missing something obvious here? The only I haven't done (I'm thinking as I type this) is go in to the modules listed and look for the individual block.

 

[superfordman]

Ok, so enabling PSA had no effect. Looking at its info icon, it talks of slowing in corners etc. This must mean it works with Nav and bluecruise is possibly needed as well.

Good to know. It might be that you're down under and maybe isn't compatible there/yet? Its all driven off collected data usually, where it knows when to start slowing down for decreasing speeds and certain curves. You'll see it working in the IPC if it is since you have a 23, but where you're located might be the hang up with it.

You don't need connected nav or BC for it to work.

 

[Platinum Peasant]

Has anyone successfully changed DRL brightness on the refreshed Raptor?

 

[hotrodmex]

- Turn off lane centering "put your hands on the wheel" nanny or make it more forgiving?

No. All you have to do is rest one hand on the wheel to keep it happy.

- Add bed camera (and possibly other cameras) to the center screen stack?

You mean the SYNC4 screen and not the Instrument cluster, correct? This should be in the side card with the Lariat already, and the full bed camera full screen from the camera button. Does your not show up?

Instrument cluster: No.

- Change the default background color on the digital gauge cluster (make it look like its in Normal when its in Eco, etc)

No.

 

[waders41]

You mean the SYNC4 screen and not the Instrument cluster, correct? This should be in the side card with the Lariat already, and the full bed camera full screen from the camera button. Does your not show up?


Nope mine doesn't show up on the side card option list. Wasn't standard on the 21s but I belive there is some way to add it.

Sponsored