Does anyone know if the active motion massage seats can be added after purchase or if they will be a retro fit from ford at a latter date

[JJSnell]

I'm getting everything ready to work on this project, to add MCS to my '23 Platinum.

Did any of you disconnect the battery to perform this project?

I did not. Nor have about 3 others I've helped through this project, you can if you want, but not necessary.
All associated "electrical" are dead unless the key is on. You cannot run any seat motors, stereo or massaging seats, without the key and it being on, so really not necessary at all.
Auto running boards can engage, but just keep your key in the house and you'll be fine.

Sponsored

 

[Los150]

This just arrived and I was wondering if this is a screw-up on Ford's side or what.
I don't trust the vendor, as 2 other items were clearly used parts, with damage so I don't know who to trust right now.
I ordered DG9Z-14A701-BAM
I received what LOOKS correct but is part # DG9T-14A701-BE3JA6

I see no other part numbers on the piece itself.

 

[JJSnell]

This just arrived and I was wondering if this is a screw-up on Ford's side or what.
I don't trust the vendor, as 2 other items were clearly used parts, with damage so I don't know who to trust right now.
I ordered DG9Z-14A701-BAM
I received what LOOKS correct but is part # DG9T-14A701-BE3JA6

I see no other part numbers on the piece itself.

Looks like it may work....

 

[HammaMan]

This just arrived and I was wondering if this is a screw-up on Ford's side or what.
I don't trust the vendor, as 2 other items were clearly used parts, with damage so I don't know who to trust right now.
I ordered DG9Z-14A701-BAM
I received what LOOKS correct but is part # DG9T-14A701-BE3JA6

I see no other part numbers on the piece itself.

If it arrived in an unadulterated box complete with the paper glue tape intact, it's the right part as that's the factory packaging. If it arrived with the paper tape cut and replaced with any other tape it's safe to bet it's been opened at the very least. Does it have the MCS controls in the lumbar? If yes, that's your part. The part number on the unit itself doesn't always match the label. Even the dates on the label will be different because the date it's made isn't always the date it's boxed. There's any number of QC processes that could be done. I just received modules whose pack date was a month after the manufacture date.

 

[Los150]

Looks like it may work....

Yes, you're referencing the part that I wanted. I do not see any cross-reference to the part they actually shipped me. I'm more concerned that it might be for a F-250 or something where maybe the pinout is slightly different or who know what.

All the other items that were factory sealed matched with what the outside of the box said. I'm inclined to send it back, along with 2 other items in my order that arrived CLEARLY used and damaged. I think they received them back and didn't even bother to look inside, to see what some customer shipped back to them. Ridiculous.

 

[HammaMan]

Wow, that's shady sending used / damaged parts when you ordered new. Someone clearly defrauded them if those are returned parts.

 

[JJSnell]

Yes, you're referencing the part that I wanted. I do not see any cross-reference to the part they actually shipped me. I'm more concerned that it might be for a F-250 or something where maybe the pinout is slightly different or who know what.

All the other items that were factory sealed matched with what the outside of the box said. I'm inclined to send it back, along with 2 other items in my order that arrived CLEARLY used and damaged. I think they received them back and didn't even bother to look inside, to see what some customer shipped back to them. Ridiculous.

Ahhhh I didnt see the fine print on the actual part... Sorry....

 

[Los150]

Finally got the MCS installed on my Platinum.

I did have a question:
When I hit the seat on the button, the options pop up on the screen and everything works. What I wanted to know is if there's an option in FORScan so that after a certain number of seconds of inactivity, the screen could go back to the previous screen.

The reason I ask is because our Lincoln has the MCS and after about 6 seconds of inactivity, it goes back to the NAV screen or whatever the previous screen was. On my F-150, it just stays there for good. I have to manually go back to Android Auto or Audio. Just an annoyance.

 

[5.0Screw22]

I've never seen a setting in Forscan for that, but doesn't the back button on that screen take you right back to your previous screen? I have not completed this project, or I would test it for you.

 

[Los150]

I've never seen a setting in Forscan for that, but doesn't the back button on that screen take you right back to your previous screen? I have not completed this project, or I would test it for you.

It might but it would be nice if it behaved like the Lincoln, and just switched back on its own.

 

[5.0Screw22]

It might but it would be nice if it behaved like the Lincoln, and just switched back on its own.

I think my previous 2019 F150 Limited and my wife's 21 Expedition change after a period of time as well, but I really do not find it that cumbersome to tap the back button. Plus, if it were 6 seconds, someone would want 10 seconds and someone else would complain that it was not 30 seconds and then another person would want 4 minutes, etc.. No matter how you do it, there will be someone who wants it to be different. In the end, I would say that the manual method seems to make the most sense. Then everyone can go back exactly when they want to, or when the wife wants to.

 

[rpold150]

Finally got the MCS installed on my Platinum.

I did have a question:
When I hit the seat on the button, the options pop up on the screen and everything works. What I wanted to know is if there's an option in FORScan so that after a certain number of seconds of inactivity, the screen could go back to the previous screen.

Nice work!

That would make sense that there might be a single field to hold the number of seconds to return. This was one of my first thoughts after adding MCS. I never even noticed the "back" button and usually just push the media or AA button.

 

[Los150]

Nice work!

That would make sense that there might be a single field to hold the number of seconds to return. This was one of my first thoughts after adding MCS. I never even noticed the "back" button and usually just push the media or AA button.

I too am assuming there's probably a location in FORScan where it could be changed and we just don't know it. Yet

 

[HammaMan]

It's an annoying quick quickly forgot about

Several other features pop up and go away, but I think it's in the code itself. Haven't seen a flag for it yet. Curious how it behaves in 2024s -- that may be an indicator.

 

[Kev's Ruby Ranch]

Anyone have a lead on part MU5Z14A698F. Have everything else.

Thanks

Sponsored