2021+ F-150 FORScan List / Database / Spreadsheet

[TheLongHorne]

Hello All,

I bought a pair of aftermarket lights and need to change the DRL option from the stock halogen low bean to the parking light now. Don’t really see a cut clear option to do that, can someone help me out?

thanks!

(Pic for reference)

Sponsored

 

[yamamanr1m]

I think you have to have Active Park Assist for the Hitch Assist to work.

I don't think so... I Have 360 Cam, sensor parking... In have not seen any of this related about to have Pro hitch assist working... will double check again...

 

[Snakebitten]

I don't think so... I Have 360 Cam, sensor parking... In have not seen any of this related about to have Pro hitch assist working... will double check again...

He's correct though. The technology for self steering the truck to the hitch is the same technology as the self steering Park Assist.

If your truck doesn't have Park Assist, or it had Park Assist Delete on the build, you will need the IPMA from a truck with Park Assist.

At least that's how I understand it.

 

[yamamanr1m]

On your sync screen under settings you can change between MPH and KPH. This is separate from the setting on your dash gauges. I think it's under vehicle settings but might be under general. Nav has another set of settings when you have that open. I don't recall a setting for it there but you can look.

Thanks for your help. I got It ! I had to put it on MPH and set it back in KPH and voila! Ford nav came back in KPH. Strange bug. The setting is in option / general menu.

 

[yamamanr1m]

He's correct though. The technology for self steering the truck to the hitch is the same technology as the self steering Park Assist.

If your truck doesn't have Park Assist, or it had Park Assist Delete on the build, you will need the IPMA from a truck with Park Assist.

At least that's how I understand it.

Hoooo... okay! I didn't realize that was the same thing doing the steering control. Thanks

 

[dc3843]

Yes here you go.
But this will also disable the physical button between the speaker and screen buttons on the dash. These settings work in my 2022 Raptor which should be the same as your truck.

Delete SeriusXm

APIM

7D0-01-01

Dxxx

xxxx

xx--

decrease the number in "D" by 2. If it is a 2 make it 0, if it is A make it 8.

I hope this will get answered I know this is an old post. I bought a 2022 Bronco, it has the XM antennas but apparently because it was bound for puerto rico the XM is disabled. What would I put in the fields to try and enable XM? It currently doesn't show XM as an available source.

 

[jcaspar]

So has anyone been able to get hitch assist to work on a 2021 with active park assist?

 

[JIMFOUNTAIN]

So has anyone been able to get hitch assist to work on a 2021 with active park assist?

Yes. No and NO! Yes - Perhaps 1 out of 4 times the ball is right under the hitch. No - 3 out of 4 it misses and stops for me to try again. NO - once it accelerated as it closed from 18 inches. Unfortunately this was a 3 of 4 and the trailer was offset about 4 inches right. Smacked the bumper messing up the black plastic top tread (not sure what to call it).

The dealer worked on it and found an error in the SECM. Replaced it and the top tread. Maybe it works completely reliably now but I just got the truck back and haven't had time to go out to the boat storage.

Theoretically it should work or dealer should fix. It is in the 2021 owners manual page 439. It is also described in the Sync 4 version in truck owners manual. But be cautious and ready to brake.

 

[rboyer224]

Man, it feels empowering making FORScan changes.

I made a bunch of changes about 2 months ago and just fired it up again tonight to add 90% battery charge, cameras to come on with parking sensors, and 5blinks instead of 3.

Hello. Where is the "Cameras to come on with parking sensors? Thank you.

 

[Geecheeboy_5.0]

Looks like the IPMB may have to do with Trailer reverse guidance..

I have mine all working. The only problem is you only get the hitch cam and the cargo cam in motion. The others are not selectable. You can also only switch through the cameras in motion with the camera hard button. If you initiate the cam in motion.. come to a stop and then use the soft button to select the front camera I believe then it will stay on.

I used the 21.5 trucks as a guide for the cam in motion. My entire set up is after the fact anyway.. I didn’t have 360 or 12” from the factory I added it all. Along with the cargo cam.

What do I need to change in forscan to correct this issue?

 

[Jesse-Infotainment]

What do I need to change in forscan to correct this issue?

Did you change something?

 

[Geecheeboy_5.0]

Did you change something?

I did the 12” upgrade myself and was working fine then uploaded wrong profile to forscan… erased, added my truck back and uploaded my apim as built, changed screen back to 12” and ever since then rear camera doesn’t work.

 

[fordtruckman2003]

What do I need to change in forscan to correct this issue?

Using work laptop for updates? ?

Gotta admit I thought about it, but it's a POS. ?‍

 

[Northguy]

Hey guys/gals have a question about adding seat heating controls to the climate bar /unreal engine. I don't have cooling just heating. Ended up liking the climate bar and the empty space on either end is driving me crazy.

In @Livnitup spreadsheet (master's work of art btw), in the common section it says to use an A for those with heated and cooled seats - no other option. In the detailed tab for APIM changes it has more options. For heated seats only - there are 4 options depending on "mode man" and "climate control type". If i use the same condition that resulted in an A for the heated and cooled seats, it would suggest to use an E for heated only.

Any advice? Thanks ahead of time as always

 

[Livnitup]

Hey guys/gals have a question about adding seat heating controls to the climate bar /unreal engine. I don't have cooling just heating. Ended up liking the climate bar and the empty space on either end is driving me crazy.

In @Livnitup spreadsheet (master's work of art btw), in the common section it says to use an A for those with heated and cooled seats - no other option. In the detailed tab for APIM changes it has more options. For heated seats only - there are 4 options depending on "mode man" and "climate control type". If i use the same condition that resulted in an A for the heated and cooled seats, it would suggest to use an E for heated only.

Any advice? Thanks ahead of time as always

Find the option for heated only that also matches your factory value on Mode Man & Climate Control Type so if your factory value is 1 then you would use D. If your factory value is 2 then you would use E

Sponsored