What did you do TO your F-150 today? 🙋🏻‍♂️

[sbi]

I installed the tow mirrors I bought and programmed them in with forscan and had to do a 360 camera calibration. I got them for just over $1400 shipped brand new.

If there is one item that I regret missing from my build is tow mirrors.

How did you do the 360 calibration?

Sponsored

 

[SpaceWhiteF150]

Why do you need to run cable if it is powered off mirror?

It’s is powered by the obd2 port.

 

[Willy]

Cheap, easy and they look good. Quality seems to be okay. Let's see how they hold up to the elements before I order the XLT gloss black front grill cover.

 

[emiantan]

Since I have found so much value from all of your posts on this forum and in this thread, I thought others may been interested in my progress so far. Everyone here keeps giving me great ideas on what next TO do to my truck. Here is the list and a few pictures. I still have several items to complete. My apologies for taking up so much screen real estate with this post.

Added Back Deleted Lighted Cupholders, Media Bin and Glove Box (Wiring Harness from JHForman)
Removed FX4 Decal

Ford Dealership
Bed-liner Spray-in
Front/Rear Mud Flaps (Front Flaps Removed due to Larger Tires and Wheel Offset)
2” Leveling Kit - ReadyLift kit
Ford Extended Warranty (offered due to dreaded Warranty CEL repair)

Burt Brothers
New Tires: 285/65R20 Toyo Open Country AT3
New Wheels: 20” Fuel Rebar 6 Gunmetal +20 Offset (Major cutting and trimming)

TonneauCovered
BAK Revolver X4s Tonneau Cover

Coatic Labs
Ceramic Coating
Window Tint 20% All Windows Except for Windshield
Full Nose PPF
PPF headlights

Stage3Motorsports
Rear Wheel Well Liner

Etsy
Custom Cup Holder
Platinum Tailgate Letters

Amazon
USC Hitch
Vehicle OCD - Center Console Organizer for Ford F150

Elevate
T-Slot Rails for Crossbars
RhinoRack
Rhino Rack Cross Bars

Talons Garage
Catalytic Converter Shield

MegaOhm Motorsports
Billet Fuel Door Pin
External Bypass - Premium RC Edition

 

[Jersey devil]

Those wheels look like the ones on my Z06. They're really nice but a bitch to clean

 

[euphoric28]

If there is one item that I regret missing from my build is tow mirrors.

How did you do the 360 calibration?

You can do the 360 calibration with forscan. Click on the wrench and it should be in there. After that it walks you through what to do.

 

[SnareDrum]

Factory air filter was pretty dirty after all of the smoke from the recent wildfires. Replaced with a K&N filter. Also changed cabin air filter. Added washer fluid. First time I’ve seen a washer fluid low indicator in the dash. Was like what?

 

[fordtruckman2003]

Cheap, easy and they look good. Quality seems to be okay. Let's see how they hold up to the elements before I order the XLT gloss black front grill cover.

Covers the whole vent?
I really don't mind the vent holes I know some have put lights in them.

It is certainly a lot cheaper than BAP badges.

 

[WD8CXB]

Installed bed rail cleat system with divider.

Bed divider - LL3Z99286A72A
Rail system with cleats - LL3Z2655200A

I was shorted a screw. But if you have the original cleat plates you can use the torx screws from them. This system replaces the “factory” stuck in place cleats and allows you to move 4 or more cleats (comes with 4). The divider is very nice. The whole install took approx 30 minutes.

Fits under tonneau cover - VML3Z84501A42KD

Interested in the cleat and rail system. Is the P/N LL3Z2655200A a Ford part? Wasn't able to find it on-line yet.

 

[Braeden]

Interested in the cleat and rail system. Is the P/N LL3Z2655200A a Ford part? Wasn't able to find it on-line yet.

Yes it is.

Here is the direct link to it https://accessories.ford.com/products/cargo-management-system-bed-rails-and-cleats-1

 

[WD8CXB]

Yes it is.

Here is the direct link to it https://accessories.ford.com/products/cargo-management-system-bed-rails-and-cleats-1

Thanks! Very interested in this.

 

[scott011422]

Yes it is.

Here is the direct link to it https://accessories.ford.com/products/cargo-management-system-bed-rails-and-cleats-1

Called Ford. Only available as the kit. Need a cleat or rail? Need to order the whole thing. I like my mounts better since I’m retaining the factory cleats. But I like their rails so much better!

 

[Braeden]

Called Ford. Only available as the kit. Need a cleat or rail? Need to order the whole thing. I like my mounts better since I’m retaining the factory cleats. But I like their rails so much better!

Dang, good to know!

 

[Eskram]

Installed what I thought to be an OEM bed divider, but Ebay got me (shame on me for not reading the description more carefully). It's a two-piece design, joined by 10 bolts but seems solid enough to not make me regret it.

 

[Davexxxx]

Bought a soft sided cooler that fits nicely in the center console and finally moved all my stuff from the old truck to the new.

I guess its really mine now

Sponsored