XLT Power Folding Mirrors Retrofit - How To

[tilefordude]

update i got my mirrors on they work but i have tried to use forscan to enable autopowerfold and i cannot for the life of me!

Sponsored

 

[jbaiii]

I have XLT 302 A with 360 cameras. Installed the new mirrors and all features work. Installed the new switches and the wiring harness but they don’t fold. Assuming I have to program in Forscan to get power fold activated? Is that correct and pardon my rookie question

 

[JMoney17$]

Yes you have to program in for scan to make them work fully

 

[jbaiii]

Yes you have to program in for scan to make them work fully

THANKS SIR!!!!

 

[vmantia1980]

Can anyone share the Forscan codes to enable Power Fold Mirrors?
I have the switch but had done some big resets in FDRS and updates to get my APIM working.
I think I need to reprogram my mirrors/enable power fold as my truck originally did not come with them.

 

[vmantia1980]

Bumping this up
Can someone send all the Forscan codes from the boosted instructions, I lost my codes due to reverting to asbuilt for troubleshooting and no backup smh

 

[HammaMan]

Bumping this up
Can someone send all the Forscan codes from the boosted instructions, I lost my codes due to reverting to asbuilt for troubleshooting and no backup smh

scroll through the sheet to find them

 

[Chaos150]

Hey guys I need some help. I have the lariat power fold tow mirrors installed on my XLT with the driver door switch. I used boosted grey goose power fold jumper wiring. Hooked it all up and I already had the values entered in for scan. When I hit the fold button they act like they want to move and stop. They will not fold. Both driver and passenger sides. These are tow mirrors not regular mirrors. Any help would be appreciated

 

[Chaos150]

Got it fixed. I had “tow mirror fold enabled and once it disabled it and got it written. Boom it worked

 

[bwdutton]

After 3 months finally got my mirrors on Friday and just installed them. I'm lame at this stuff so it took me several hours and many scrapes on my arms to physically get the new wiring harnesses, etc installed. Some tips I learned for others:
* I have a 2022 XLT 302A
* Do the passenger door first. Fewer wires on your first door is easier to deal with.
* When swapping the mirrors (I did this first before the harness swap), leave the window down.
* When you go to take off the door panels this video was a big help for me Leave the window down when you first take off the panel, but before you disconnect wires put it back up. It's much easier to work your hands in the door area when the window is up.
* Once the door panel is separated, there is a little lock/latch you can pull to release, see attached photo with the yellow cable.
* When pulling the wires through the door I loosened the bottom bolt in the other photo and the space created from that made things easier.

In forscan I had to change the following to get the mirrors working and autofolding when I lock the vehicle:
* DDM/PDM change "Mirror Power Fold" to "Ford Auto Fold"
* DDM/PDM change "Telescopic Mirrors" to "Enabled"
* APIM "Mirrors Autofold" = "Enabled"
* APIM "Powerfold Mirrors" = "Enabled"
Then after restarting the truck in the on screen vehicle settings go to mirrors and set Autofold to on

The only issue I'm having after all this is my power door lock buttons on both doors no longer work. The remote will lock/unlock and I can press the physical button to lock, but the electronic unlock/lock don't work. Does anyone have any guesses on this issue? The cables are snapped in, I double checked both doors.

 

[HammaMan]

After 3 months finally got my mirrors on Friday and just installed them. I'm lame at this stuff so it took me several hours and many scrapes on my arms to physically get the new wiring harnesses, etc installed. Some tips I learned for others:
* I have a 2022 XLT 302A

So you swapped the entire door harnesses? I just got a platinum harness and tore it apart to use as parts to add in all of the missing wires. I've done other things and swapped to memory lock button and it all still works as I've gone to memory seat / mirrors.

 

[bwdutton]

So you swapped the entire door harnesses? I just got a platinum harness and tore it apart to use as parts to add in all of the missing wires. I've done other things and swapped to memory lock button and it all still works as I've gone to memory seat / mirrors.

Yes, I ordered all of the parts from post #67 earlier in the thread. I'm not sure what I missed, everything fits great.

 

[HammaMan]

Yes, I ordered all of the parts from post #67 earlier in the thread. I'm not sure what I missed, everything fits great.

So you replaced the PDM / DDM as well, or did you keep your factory ones?

That's one of the issues w/ that post, you don't need to replace those. If so you probably need to PMI those modules to your truck.

 

[bwdutton]

So you replaced the PDM / DDM as well, or did you keep your factory ones?

That's one of the issues w/ that post, you don't need to replace those. If so you probably need to PMI those modules to your truck.

Sounds like that could be the issue, I only toggled the settings. I'll look into the PMI process, thanks!

 

[bwdutton]

So you replaced the PDM / DDM as well, or did you keep your factory ones?

That's one of the issues w/ that post, you don't need to replace those. If so you probably need to PMI those modules to your truck.

Do you have any instructions on what this includes? Is it a matter of loading the previous as built and then doing a write all? Or do I need to get FDRS or the Forscan 2.4 beta to do the PMI process?

Sponsored