Sponsored

Search results

  1. Testing an Aux batt solution...

    I am going to try an eco-worthy battery first and see how that works out. When I look at the voltage monitor attached to my main AGM battery it says 100% charge. The vehicle battery state of charge in the OBD MX tool is 86%. Additionally when I put in the new battery and reset the BMS system...
  2. Testing an Aux batt solution...

    My voltage just steadily trends down every day. The LFP battery provides a brief rise in resting voltage but it drops back down over a week. I am wondering if I have some other parasitic drain. I have a usb voltage monitor for the battery and the mega ohm device to turn off the EV sounds but...
  3. Testing an Aux batt solution...

    I have the battery monitor and the OBD MX+ hooked up. That is it. There shouldn't be any other devices.
  4. Testing an Aux batt solution...

    So I went and replaced every battery and made sure everything was fully charged. I reset the BMS. Voltage initially popped up to 13.2V at rest but has continually trended down. I did about a 4 hour drive this weekend and it does not appear to have changed the downward trajectory. I usually do...
  5. Testing an Aux batt solution...

    I think I am just going to replace my main 12V battery. I have been monitoring the voltage with the truck at rest parked. With the lithium battery it goes from 13.2V down to 12.7 volts over the course of 3 days. These graphs demonstrate 2 cycles of using the lithium battery with rapid draw down.
  6. Testing an Aux batt solution...

    This is the Data I was able to pull tonight. Again I fully charged the main 12v battery and installed/charged a larger AUX battery about 2 weeks ago. I fully charged the lithium battery Sunday and reinstalled it. I have previously set forscan to maintain a charge of 100%. I don't know why my...
  7. Testing an Aux batt solution...

    I found them I think. Thanks!
  8. Testing an Aux batt solution...

    @Jmitchelltfo I can't seem to find those dashboard monitors in the MX system? Do you know where they are? I tried downloading snakebitten's dashboards but they don't seem to be working correctly for me using an iPhone.
  9. Testing an Aux batt solution...

    @Jmitchelltfo I have an MX+ but I was not running the data fields you are showing. I just downloaded the @Snakebitten files for the MX+ so I will give it a try tomorrow and see what they are showing. I monitored the voltage today and it dropped from 13.2 to 13.1. Thanks for the...
  10. Testing an Aux batt solution...

    I was having low battery for awhile I believe and then got the 12 volt warning in the app which led me to take action. I had previously replaced the original battery shortly after purchasing my '23 powerboats with an H7 battery. It is probably 2-2.5 years old. After the warning I replaced the...
  11. Upfitter Switch installation

    I haven't installed it yet. I found a video online where a guy mounted his box over the fuse box near the passenger side (Different up fitter switch unit). That is the only area that I think you can put it unless you lengthen the wires. I printed out a wedge I can use above the fuse box at an...
  12. Heated Steering Wheel Retrofit - updated with information

    I have a Mongoose plus which I believe should be adequate but I have not used it yet. I have pretty much stuck to Forscan.
  13. Heated Steering Wheel Retrofit - updated with information

    I went in Forscan and made the changes necessary to all the modules but could not get either lariat level HVAc module to turn the heated seats on. I did not see the conversations above until after I posted my recent comment. My question is how do you program the HVAC module to work without a...
  14. Heated Steering Wheel Retrofit - updated with information

    I have an XLT with heated seats. I tried 2 different HVAC modules with buttons for heated and cooled seats. I could not get them to turn on the heated seats. I am pretty sure that the heated and cooled seats have their own module in 1 of the seats and thus it is not present in the HVAC module...
  15. XLT Power Folding Mirrors Retrofit - How To

    Sent you a message with instructions
  16. Upfitter Switch installation

    I just tried to start the install on an F150 Powerboost. I believe there is a component unique to the powerboats immediately behind the batter which prevents installation of the relay box. Things look pretty tight on that side of the truck and I am not sure I see a good place to mount it.
  17. Upfitter Switch installation

    Still no instruction available. He said they would be available and yet again has failed to follow through. Kind of frustrating.
  18. Upfitter Switch installation

    I am pretty confident that you will get what you ordered. I just received mine - No instructions of course. I just think he does a very poor job of running his business - Not replying to emails, saying things will ship when they don't, etc.
  19. Upfitter Switch installation

    Based on my own experience the odds you get a response from your email is 50% or less. I usually have to email several times to get a response.
  20. Upfitter Switch installation

    Makes me think he has not completed them yet honestly.




Top