Great looking truck! Thanks for rsharing!2015 Bilstein 6112 at top setting. 5160’s in the rear. 5.0 with max tow package. Nitto ridge grappler 33x12.5x18 on 18x9 +18 Method 309’s.
Epic truck and lift.2015 Bilstein 6112 at top setting. 5160’s in the rear. 5.0 with max tow package. Nitto ridge grappler 33x12.5x18 on 18x9 +18 Method 309’s.
very nice.. just picked up my 23 Platinum yesterday and cant decide on just putting 2" level up front and leaving it alone after that! ive always done 3-4 " lift kits with 35s but man it gets rough driving that everyday!!’23 Platinum PB w 2” ready lift level and 295/65r20 Nittos.
the 275/60 tires looked really small after the level. At a minimum you will need some meatier tires, even if you dont go w 35s
Hi Jerry. Not a lot of trimming. Just a small amount from the front plastic/rubber trim. Not even noticeable. Just used a sharpie to draw the line/profile, then used a multipurpose tool to cut along the profile. I had to do it 2 or 3 times (a little bit at a time) because I didn't want to cut too much off. The truck before vs. after is night and day. Oh...and don't forget the black lug nuts. That is the detail most fail to do.
Thanks man! I’ve got gorilla black lugs coming! Ima order spacers today as well! Nice truck bro, and thanks for the reply!Hi Jerry. Not a lot of trimming. Just a small amount from the front plastic/rubber trim. Not even noticeable. Just used a sharpie to draw the line/profile, then used a multipurpose tool to cut along the profile. I had to do it 2 or 3 times (a little bit at a time) because I didn't want to cut too much off. The truck before vs. after is night and day. Oh...and don't forget the black lug nuts. That is the detail most fail to do.
See the BEFORE and AFTER below.
The previous gen BAP wheels look really good on your truck. I looked around and they are hard to find in black.Hi Jerry. Not a lot of trimming. Just a small amount from the front plastic/rubber trim. Not even noticeable. Just used a sharpie to draw the line/profile, then used a multipurpose tool to cut along the profile. I had to do it 2 or 3 times (a little bit at a time) because I didn't want to cut too much off. The truck before vs. after is night and day. Oh...and don't forget the black lug nuts. That is the detail most fail to do.
See the BEFORE and AFTER below.
