2021+ F-150 FORScan List / Database / Spreadsheet

[Jesse-Infotainment]

Sorry to ask such a novice question, but on MY22 truck, built between March to June 2022, I am trying to enable cameras at any speed. I'm having trouble following the spreadsheet as it seems as though my blocks aren't the same as what is noted in the spreadsheet.

Here are my original values for APIM and IPMA:

What I did based on the spreadsheet, which had no change - cameras turned off at speed:

Thanks in advance!

2022 Comes with Cams in motion
The way it was original is the way it needs to be

Sponsored

 

[s.v.t.]

2022 Comes with Cams in motion
The way it was original is the way it needs to be

gotcha. So cams in motion really just means I can use the bed camera, hitch camera, and the rear view camera with that annoying displayed box of text? I was hopeful I could use any of my cameras at any speed without any nanny messages, etc.

 

[Jesse-Infotainment]

gotcha. So cams in motion really just means I can use the bed camera, hitch camera, and the rear view camera with that annoying displayed box of text? I was hopeful I could use any of my cameras at any speed without any nanny messages, etc.

Yeah.. that is it.. those 3 or 4.. depending if you have the aux cam enabled.

 

[s.v.t.]

Yeah.. that is it.. those 3 or 4.. depending if you have the aux cam enabled.

That’s a bummer. Hopefully an OTA changes this, or some sort of plug-and-play device can circumvent the speed nanny.

 

[FrankThompson]

I would be happy if they could remove the stupid message on the back camera while in motion. It's highly annoying. it blocks the car right be hind me most the time.

 

[Kodiak]

I would be happy if they could remove the stupid message on the back camera while in motion. It's highly annoying. it blocks the car right be hind me most the time.

This is what I am hoping for too. Get rid of the stupid black box and let us use this as a proper digital rearview mirror/camera.

 

[hotrodmex]

Just throw it into reverse and the message goes away. It seems to clear the road as well.

 

[Livnitup]

I've just added a Lightning-specific HCM spreadsheet here: https://bit.ly/3waQ0tS

It came to my attention that some people were using values from the non-Lightning ICE HCM spreadsheet for the Glare-Free Lighting mod but some of the addresses are different on a Lightning:

734-01-02 xxx1 xxxx xx-- Automatic High Beam Control Ramping
734-04-02 x*xx xxxx xx-- Bending Enabled

 

[s.v.t.]

Regarding Lincoln Auto fold when I unlock my doors, open the drivers door, and lock from either my fob or the door lock button - with the drivers door open, as soon as I lock the doors the mirrors unfold. I am under the impression that the mirrors should unfold only when I either close the door when it’s still unlocked, or if I start the car.
Anyone else experiencing anything similar?
Any thoughts, or suggestions?

 

[YzermanTopShelf]

Newbie to forscan and already struggling with the basics! I purchased the OBDLinkEX, got a cheap laptop with Windows 11 and installed/licensed FORScan. Went to try it this morning the laptop isn't picking the OBDLinkEX. Laptop is on, FORScan is running, OBDLinkEX is plugged into the truck and computer, truck is on but engine is not running. I get an error saying "No adapter found. Please check connection and try again" and then I get a pop-up with suggestions. I have no idea what the HS/MS CAN switch is - is that my problem? The one other thing I've noticed is that the light on the OBDLinkEX is yellow - should that be green? I'm wondering if I have a Windows 11 driver issue... I've primarily been an Apple user for the last 15 years ?

Thanks!

 

[Livnitup]

Newbie to forscan and already struggling with the basics! I purchased the OBDLinkEX, got a cheap laptop with Windows 11 and installed/licensed FORScan. Went to try it this morning the laptop isn't picking the OBDLinkEX. Laptop is on, FORScan is running, OBDLinkEX is plugged into the truck and computer, truck is on but engine is not running. I get an error saying "No adapter found. Please check connection and try again" and then I get a pop-up with suggestions. I have no idea what the HS/MS CAN switch is - is that my problem? The one other thing I've noticed is that the light on the OBDLinkEX is yellow - should that be green? I'm wondering if I have a Windows 11 driver issue... I've primarily been an Apple user for the last 15 years ?

Thanks!

Try installing this driver: https://www.ftdichip.com/Drivers/CDM/CDM v2.12.28 WHQL Certified.zip

Also, make sure you go into FORScan settings, connection tab and choose adapter type FTDI and check auto-baud increase

 

[scott011422]

Regarding Lincoln Auto fold when I unlock my doors, open the drivers door, and lock from either my fob or the door lock button - with the drivers door open, as soon as I lock the doors the mirrors unfold. I am under the impression that the mirrors should unfold only when I either close the door when it’s still unlocked, or if I start the car.
Anyone else experiencing anything similar?
Any thoughts, or suggestions?

Mine does the same. Point in fact, it does it to the passenger door too. As soon as I hit the lock button, out they come.

 

[YzermanTopShelf]

Try installing this driver: https://www.ftdichip.com/Drivers/CDM/CDM v2.12.28 WHQL Certified.zip

Also, make sure you go into FORScan settings, connection tab and choose adapter type FTDI and check auto-baud increase

Thanks @Livnitup! I tried installing the driver via the device manager, but windows says the best driver is already installed. Could that be correct or is there a better way to install the drivers? I did change the connection type to FTDI.

 

[antho]

Thanks @Livnitup! I tried installing the driver via the device manager, but windows says the best driver is already installed. Could that be correct or is there a better way to install the drivers? I did change the connection type to FTDI.

@YzermanTopShelf
What do you have set in your connection settings?
Open forscan
Click on settings (Gear Icon)
Click Connections Tab
Should have a Connection type box. You can either set it to COM or Auto. There is also a Auto Connect box next to that. Select that box.

 

[Livnitup]

Thanks @Livnitup! I tried installing the driver via the device manager, but windows says the best driver is already installed. Could that be correct or is there a better way to install the drivers? I did change the connection type to FTDI.

If the adapter is plugged into the laptop the light will be orange on adapter but should go green when plugged into the OBD port once you put ignition in accessory mode so not sure what the issue is here; I don't currently have Windows 11 on my devices so I haven't experienced this problem.

Maybe open a support ticked with OBDLink here at the bottom: https://www.obdlink.com/support/ex/

Sponsored