ECU module programming guide using FDRS

[jeffm4688]

I finally made it home from my 3400 mile road trip, I attached a weight to the steering wheel most of the time and it did a fairly good job driving itself (aside from I95 in south carolina which is utter garbage) and the couple of times it decided the lane I was in wasn't a lane and tried to steer me into the car next to me (this shouldn't happen).

I ordered the mongoose plus I want real blue cruise ASAP.

Sponsored

 

[mflynndelta]

This does get all of us stuck on 21281 rev244 moving on.

I am also stuck on 21281 rev244 ....... Are you suggesting the new APIM update will fix this issue of being stuck for me ?

 

[mflynndelta]

Would anyone mind checking mine, I assume I have an APIM/TCU update waiting

1FTFW1E85MFA49677

Could you also check mine for the APIM update if it is waiting ? 1ftfw1ed3mfb23739

 

[abd79]

Could you also check mine for the APIM update if it is waiting ? 1ftfw1ed3mfb23739

You have a few updates ready.

 

[mflynndelta]

You have a few updates ready.

thank you
what order do you suggest I run them in ? Will this fix my issue being stuck at 21281 revision 244

 

[RellIk&5]

I am also stuck on 21281 rev244 ....... Are you suggesting the new APIM update will fix this issue of being stuck for me ?

Yep. It certainly does. I was stuck on 244 for quite some time. Did all the updates today. The GWM was the most problematic for me as it kept failing. Right before I was about to give up for the day, it finally completed the configuration successfully.

 

[RellIk&5]

thank you
what order do you suggest I run them in ? Will this fix my issue being stuck at 21281 revision 244

TCU first. It’ll automatically move to the APIM afterwards. You’ll get a GWM update after you complete the TCM and APIM. I’d do the IPC last as that will take the longest.

 

[abd79]

thank you
what order do you suggest I run them in ? Will this fix my issue being stuck at 21281 revision 244

TCU
APIM
GWM

TCU will most likely also trigger the APIM after it completes. Once those 2 (TCU + APIM) are done you'll likely get 1 or 2 GWM updates with one final APIM. (1 TCU, 2 APIM and 2 GWM updates in total is what I got)

Once all of these are done then you can tackle the IPC. As for the first post I do recommend using the Mongoose adaptor for these over the Nano and reverting back any forscan changes you made to any of these modules before starting.

 

[Ebrou]

TCU first. It’ll automatically move to the APIM afterwards. You’ll get a GWM update after you complete the TCM and APIM. I’d do the IPC last as that will take the longest.

@RellIk&5 did this give us xlts camera at speed?

 

[Dinozero]

Is there a solution to 2021 XLT 302a that is stuck on 2.3.0 update?

 

[Kanuck]

As Dinozero above, I also am at 2.3.0. Would Ford be updating the BC EA trucks first before the non BC EA trucks, like mine? I do not have BC or 360 Cameras, so I figure I am at the bottom of the list.

Is there anyone around or near Winnipeg, Manitoba that has the equipment and be able to update my 2021 XLT 302 A truck. I would come to you and buy the beer and pizza. Or you could come here and we would go fishing afterwards.

 

[jordandev]

Is there a solution to 2021 XLT 302a that is stuck on 2.3.0 update?

Yes there are new APIM/TCU/GWM updates out that a couple have applied to get over 2.3.0. I'm going to apply these today as well as I'm a 302A stuck at 21281 as well.

 

[Dinozero]

Yes there are new APIM/TCU/GWM updates out that a couple have applied to get over 2.3.0. I'm going to apply these today as well as I'm a 302A stuck at 21281 as well.

I got the 302A with the copilot 2.0 adaptive cruise.

do we know if after these updates are done our trucks get cameras while moving ??

 

[RellIk&5]

@RellIk&5 did this give us xlts camera at speed?

I forgot to check. My AC died in my truck so it's currently in with the service dept. Once I get it back, I'll check.

 

[nicholsbradley]

Been a while can someone check the old VIN? 1FTFW1E89MFA46118

Sponsored