ECU module programming guide using FDRS

[Platinum Peasant]

You are 1 revision away from the finish line.

I am at revision 364. Any idea how far that is from the finish line?

Sponsored

 

[Bob_Mac]

@Livnitup I have now confirmed that FORScan changes to the APIM & IPC are causing update issues for some people. I believe that these mods may be causing OTA problems as well.

 

[JaHoova]

For those doing TSB 22-2117 I believe there is a mistake in step 3 (2) where it says to remove the lower floor console trim panel. The USB is under the upper panel. I ended up removing both. Now to just wait for the oddball adapters I don't just have on hand...

 

[Snakebitten]

I am at revision 364. Any idea how far that is from the finish line?

I think 364 is up to date. What feature are you not getting?

 

[Skier167]

Damn that was fast!!!!! Right in the middle of the last apim update that notification popped up

 

[jtake]

Are the APIM updates just showing up for people? I have not been able to get any updates since this past weekend. I have the GSM update that is stuck, but no other updates. I do not have any DTCs either, so not sure why I no updates are shown as available.

 

[Bob_Mac]

For those doing TSB 22-2117 I believe there is a mistake in step 3 (2) where it says to remove the lower floor console trim panel. The USB is under the upper panel. I ended up removing both. Now to just wait for the oddball adapters I don't just have on hand...

May I ask why you're doing the TSB?

 

[Platinum Peasant]

I think 364 is up to date. What feature are you not getting?

I haven’t tried blue cruise yet. My bed camera at speed works, I don’t get hitch view though or side IOD view. Wondering if more updates are necessary or if Forscan changes are needed.

 

[Ajzride]

Are the APIM updates just showing up for people? I have not been able to get any updates since this past weekend. I have the GSM update that is stuck, but no other updates. I do not have any DTCs either, so not sure why I no updates are shown as available.

i would undo any forscan changes you have.

 

[Ajzride]

Now run a PMI on the IPC and report back.

will do as soon as I get home.

 

[jtake]

The only Forscan change I have ever made was the running board activation one to the DSM. And even before that, I was not seeing any updates. That one change is something I know Platinum Peasant has done, and I see he has updated.

i would undo any forscan changes you have.

 

[jtake]

Looking at my APIM in FDRS, is it corrupted somehow?

 

[Snakebitten]

I haven’t tried blue cruise yet. My bed camera at speed works, I don’t get hitch view though or side IOD view. Wondering if more updates are necessary or if Forscan changes are needed.

Strange that you would have different cameras at speed functionality than others unless you had Forscan edited values before the updates?

The sidebar camera is the bed camera for me.
Full screen camera is either bed or hitch.

 

[JaHoova]

May I ask why you're doing the TSB?

Because the 1.7.1 equivalent will not kick off. I mean eventually it would right ( up to 30 days for some people). But this appears to be the dealer fix for 1.7.1 and I'd rather apply it and move on rather than wait for an update to kick off. I had to remove those panels anyway for a ham radio project...

 

[Snakebitten]

Because the 1.7.1 equivalent will not kick off. I mean eventually it would right ( up to 30 days for some people). But this appears to be the dealer fix for 1.7.1 and I'd rather apply it and move on rather than wait for an update to kick off. I had to remove those panels anyway for a ham radio project...

This whole thread is documentation of how the truck owner can not only address the 1.7.1 snag, but every other software update Ford has available for these trucks.

Sponsored