bratliff3
Member
- Thread starter
- #1
Hello all, been watching this forum for a while and placed an order for my 2.7L 302A on 6/7/21, we'll see when it actually gets here.
Of course I'm already thinking about projects, and one thing I have on my current 4Runner is LED pod lights mounted under the rear bumper, tied in to trigger off the reverse lights, or via a separate switch on the dash for use when camping, hooking up to a trailer, etc. Since factory style switches for the F150 are pretty much limited to using Raptor or Tremor upfitter switches and mounting plates, a thought occurred to me about using the new Zone Lighting feature as a trigger. Can anyone with a 2021 confirm if the trailer backup light wire is hot when the Zone Lighting is set to the rear? I've found those are normally the easiest to tap into rather than what goes in to the taillight.
Of course I'm already thinking about projects, and one thing I have on my current 4Runner is LED pod lights mounted under the rear bumper, tied in to trigger off the reverse lights, or via a separate switch on the dash for use when camping, hooking up to a trailer, etc. Since factory style switches for the F150 are pretty much limited to using Raptor or Tremor upfitter switches and mounting plates, a thought occurred to me about using the new Zone Lighting feature as a trigger. Can anyone with a 2021 confirm if the trailer backup light wire is hot when the Zone Lighting is set to the rear? I've found those are normally the easiest to tap into rather than what goes in to the taillight.
Sponsored
