Started converting my 23 RCSB XL work truck interior

[NavyChief]

Might just paint it with trim paint as it being where it’s at if you paint it flat black it won’t be noticed as a difference.
that piece is a rubber type piece though not plastic.
I bought the entire dash from a lariat and it had all the trim pieces except that one

Sponsored

 

[OIF_Veteran04]

Might just paint it with trim paint as it being where it’s at if you paint it flat black it won’t be noticed as a difference.
that piece is a rubber type piece though not plastic.
I bought the entire dash from a lariat and it had all the trim pieces except that one

If I have to I'll just pull one out of a wrecking yard. I would prefer to get a brand new one from Ford but if they're not gonna sell it then you know. It's always other options.
I already have to get the radio control set up out of erecting yard or off eBay. Because Ford discontinued the part. The one with the chrome arounf the knobs and down the center. From what I can tell and making phone calls to Ford the only 2 remaining part numbers for that part do not have that. I need it because I upgraded to heated/cool seats and the HVAC control has the chrome. LOL

 

[Davidwnuc]

Do you know the part number for the trim piece under the glove box?

https://ebay.us/m/my1yXV
Hope that helps

 

[OIF_Veteran04]

https://ebay.us/m/my1yXV
Hope that helps

Thank you! That was a huge help.

 

[Davidwnuc]

I found this to. Mayb

Thank you! That was a huge help.

the part number they show is just for the air bag though…but maybe you can buy something on ebay that is in good enough condition.

 

[braedan10]

@NavyChief Looking good! I swapped my entire gray interior over to black so it would have the stx interior look. I know a lot of people dye or wrap their headliners but I chose to go the oem route for everything so when the time comes if you're looking for an oem black headliner for a regular cab, here is the part number for it.
ML3Z-1551944-AE

It's expensive but it mounts right up out of the box. I found out Ford makes a black regular cab headliner for their xlt regular cabs with the baja tan interior. This is the vin # for a xlt with the baja tan interior and will help you get the part number for the b pillar trim which, again, can only come from this version of the f150
1FTMF1E56NKE49415

Do you have the part number for the part that moves the seatbelt up and down?

 

[TylerNinetyTwo]

Do you have the part number for the part that moves the seatbelt up and down?

Seat belt height adjuster part #: ML3Z-15602B82-AB

You will also want to pick up the cover for it too. If I remember correctly, this covers the screw once you install the seat belt heigh adjuster. Part #: ML3Z-5460262-AB

I used a vin number from a regular cab xlt with baja tan interior (vin #: 1FTMF1E56NKE49415) but you could use any vin from a truck with a black interior like a xl with stx package or platinum, it's all the same for these two parts. Hope that helps.

 

[braedan10]

Seat belt height adjuster part #: ML3Z-15602B82-AB

You will also want to pick up the cover for it too. If I remember correctly, this covers the screw once you install the seat belt heigh adjuster. Part #: ML3Z-5460262-AB

I used a vin number from a regular cab xlt with baja tan interior (vin #: 1FTMF1E56NKE49415) but you could use any vin from a truck with a black interior like a xl with stx package or platinum, it's all the same for these two parts. Hope that helps.

I got the trim, the seatbelt adjuster are coming from eBay for around $40 a piece

 

[TylerNinetyTwo]

I got the trim, the seatbelt adjuster are coming from eBay for aro

You got them for that cheap? In black? That's crazy, I paid over $400 a piece for mine.

Sponsored