Request VIN Lookup Thread

[Soggysho3s]

3.5.3 or 3.5.3.2 will get you full screen capability.

3.5.3.2 is what I’m looking for, full screen

Sponsored

 

[ESG406]

Request OTA lookup 1FTFW1ED5MFB77138
Last known OTA 3.5.2 Oct 2022
Would like to know if there were any failed attempts as well.
Thank you

 

[rugedraw]

Request OTA lookup 1FTFW1ED5MFB77138
Last known OTA 3.5.2 Oct 2022
Would like to know if there were any failed attempts as well.
Thank you

I can only see 60 days back, no updates in the past 60 days, but 3.5.3 is in your queue since yesterday. It has downloaded almost all the files needed for the update. Good luck!

 

[ESG406]

Thank you! I will pay attention to see if anything happens.

 

[bjtcars]

Also looking for an OTA lookup if you would please,

1FTFW1E87MKD29608

3.5.2 installed on 10/5

Thank You

 

[rugedraw]

Also looking for an OTA lookup if you would please,

1FTFW1E87MKD29608

3.5.2 installed on 10/5

Thank You

3.5.3 was sent to you yesterday at noon. It has downloaded almost all the files needed for the update. Good luck!

 

[OCDoug]

You had 3.5.3 sent to you and install 8 days ago. I can only see 60 days back so I don't know if you got all the older updates your truck was due to get.

Probably need that TCU updated....and then start with the PCM.

Took my truck to the dealership the other day and they say they've updated all the modules. Would you guys mind checking my VIN when you get a chance please?

VIN: 1FTFW1ED9MFB18464


Just to confirm some of the other information I've seen in this thread and for anyone interested... the service manager told me that Ford refuses to pay them for these updates (even though at least one of mine fixed a specific overload issue with ProPower). He said in the future, my only options are to either:

1. Wait for an OTA update that will update these modules / contact the OTA escalation people. I've talked to these people in the past about failed updates and found them fairly unhelpful.
2. Come into the dealership and pay for the labor myself. For the above module updates, they billed 2 hours and told me it would be around ~$400 total. So, next time I'll just buy the mongoose and temp FDRS license.

Question for @rugedraw and @Mike G: Is there any way to tell on your end if/when a module update was included in an OTA update or when a particular module update was released? I'm curious how long my truck waited for some of these updates (most especially the DCACA one that likely fixed propower issues I've had the entire time I've owned the truck).

Thanks again for everything you guys are doing for forum members.

 

[rugedraw]

Took my truck to the dealership the other day and they say they've updated all the modules. Would you guys mind checking my VIN when you get a chance please?

VIN: 1FTFW1ED9MFB18464


Just to confirm some of the other information I've seen in this thread and for anyone interested... the service manager told me that Ford refuses to pay them for these updates (even though at least one of mine fixed a specific overload issue with ProPower). He said in the future, my only options are to either:

1. Wait for an OTA update that will update these modules / contact the OTA escalation people. I've talked to these people in the past about failed updates and found them fairly unhelpful.
2. Come into the dealership and pay for the labor myself. For the above module updates, they billed 2 hours and told me it would be around ~$400 total. So, next time I'll just buy the mongoose and temp FDRS license.

Question for @rugedraw and @Mike G: Is there any way to tell on your end if/when a module update was included in an OTA update or when a particular module update was released? I'm curious how long my truck waited for some of these updates (most especially the DCACA one that likely fixed propower issues I've had the entire time I've owned the truck).

Thanks again for everything you guys are doing for forum members.

An OTA when looked at in PTS will tell you which module(s) it updates. To corollate that update to a module update in FDRS I guess is possible, but it would have to be someone with a lot more access and knowledge than I have.

 

[OCDoug]

An OTA when looked at in PTS will tell you which module(s) it updates. To corollate that update to a module update in FDRS I guess is possible, but it would have to be someone with a lot more access and knowledge than I have.

I see, thanks for the response @rugedraw. so a particular module update may not be tied to a particular OTA update version then? I'm really just curious how long this DCACA module update has been available since it fixed a propower issue that Ford reps and dealerships have refused to acknowledge was an issue since 2021. I also found it curious that I was up to date on OTA updates, but still missing so many module updates.

 

[jeffrt]

Hi, could you please tell me if I have any pending updates?
Haven't had anything update since September.

VIN 1FTFW1E53MKE02298

Thank you!

 

[Mike G]

Could you give me some insight?

1FTFW1ED6NFA61559

Looking for OTA update for full screen apple car play
Thanks in advance!

I think the one with the yellow star is what you're looking for. This is from FDRS for your VIN.

 

[Soggysho3s]

I think the one with the yellow star is what you're looking for. This is from FDRS for your VIN.

Thanks, how do I get FDRS updates? Does that need to be done manually?

 

[Mike G]

Took my truck to the dealership the other day and they say they've updated all the modules. Would you guys mind checking my VIN when you get a chance please?

VIN: 1FTFW1ED9MFB18464


Just to confirm some of the other information I've seen in this thread and for anyone interested... the service manager told me that Ford refuses to pay them for these updates (even though at least one of mine fixed a specific overload issue with ProPower). He said in the future, my only options are to either:

1. Wait for an OTA update that will update these modules / contact the OTA escalation people. I've talked to these people in the past about failed updates and found them fairly unhelpful.
2. Come into the dealership and pay for the labor myself. For the above module updates, they billed 2 hours and told me it would be around ~$400 total. So, next time I'll just buy the mongoose and temp FDRS license.

Question for @rugedraw and @Mike G: Is there any way to tell on your end if/when a module update was included in an OTA update or when a particular module update was released? I'm curious how long my truck waited for some of these updates (most especially the DCACA one that likely fixed propower issues I've had the entire time I've owned the truck).

Thanks again for everything you guys are doing for forum members.

You have no updates showing as available in FDRS.

The Wiki page has a table with a column on the right side that names the modules that were updated by a given OTA. This wiki is maintained by humans. It may not be comprehensive.

 

[Mike G]

Hi, could you please tell me if I have any pending updates?
Haven't had anything update since September.

VIN 1FTFW1E53MKE02298

Thank you!

This is your list of available updates from FDRS, I can't see OTA status:

 

[PadU235]

rugedraw Could you check my vin for updates. 21 job 1 lariat. Received 3.52 on oct.6 and I may have gotten 3.5.3 today. The 3.53 message popped up my sync update screen but disappeared before I could even read it. I see no changes to android auto or Alexa. I am wondering if it installed completely 1FTFW1E5XMFB88922

Thanks

Sponsored